Dr. Nilay Krishna Mukhopadhyay

Professor
Department/School/Unit Name
Department of Metallurgical Engineering IIT(BHU), Varanasi
Phone No(s): 9839817585, 0542-7165627
Email: mukho.met@iitbhu.ac.in
Area of Interest: Physical Metallurgy, Quasicrystals, Nanomaterials, Bulk Metallic Glasses, Complex Metallic Alloys, Metastable phases. High Entropy Alloys, Electron Microscopy, X-ray Diffraction, Phase Transformations, Rapid Solidification, Mechanical Alloying/Milling, Interfaces, Micro- and nano-indentation, Failure analysis and component integrity
Dr. N.K. Mukhopadhyay
Professor in Physical Metallurgy
Department of Metallurgical Engineering
Indian Institute of Technology (BHU), Varanasi
 
E-mail: mukho.met@iitbhu.ac.inmukho_nk@rediffmail.com
Phone# (+91)-542-7165627/7165625 (O), (+91)-542-2575512 (R); Cell# (+91)-983-981-7585; Fax:0542-23694
78/ 2368428
 
Area of Interest: Physical Metallurgy, Quasicrystals, Nanomaterials, Bulk Metallic Glasses, Complex Metallic Alloys, Metastable phases. High Entropy Alloys, Electron Microscopy, X-ray Diffraction, Phase Transformations, Rapid Solidification, Mechanical Alloying/Milling, Interfaces, Micro- and nano-indentation, Failure analysis, and component integrity

EDUCATION (1983-90)

1985- 90     Ph.D. in Metallurgy and Materials Science
                   Dept. of Metallurgy, Indian Institute of Science, Bangalore, India
                   Thesis: "Some aspects of synthesis, structure and stability of quasicrystals"
                   Supervisors: Prof. S. Ranganathan & Prof. K. Chattopadhyay

1983-85      M.E. in Physical  Metallurgy
                   Dept. of Metallurgy, Indian Institute of Science, Bangalore, India
                   First Class; Specialization in Physical Metallurgy, (Grade: 6.7/8.0)

1979-83      B.E. in Metallurgical  Engineering
                   Bengal Engineering College, Calcutta University, (India)
                   First Class in Metallurgical Engineering, (Marks: 76.4%)

RESEARCH/ TEACHING EXPERIENCE
 
August 2012- Continuing    HAG Professor, Dept of Metallurgical Engg, IIT (BHU), Varanasi
 
July 2006- July 2012            Professor, Physical Metallurgy, Dept. of Met. Engg., IIT (BHU), Varanasi
 
July 2003- June 2004           Alexander Humboldt Fellow, (with Prof. P. Paufler) TU-Dresden, Germany
 
July 1998 - June 2006          Reader, Dept. of Met. Engg., IT-BHU, Varanasi
 
Aug.1995- July 1998            Scientist, CSIR-National Metallurgical Laboratory (CSIR), Jamshedpur.
 
April 1994 - July 1995          Q.H.F. Scientist, CSIR-National Metallurgical Laboratory, Jamshedpur.
 
Dec.1990 - Mar. 1994            Postdoctoral Fellow, Department of Materials Science and Engineering, McMaster University (Canada)

                                                Supervisors: Prof. G.C. Weatherly and Prof. J.D. Embury.
 
April 1990- Nov.1990
            Research Associate, Department of Metallurgy, Indian Institute of Science (India)

                                                Supervisors: Prof. S. Ranganathan and Prof. K. Chattopadhyay.

AWARDS/HONOURS:

  • The Indian Institute of Metals - Dr. Daya Swarup Memorial Lecture (2023)

  • EMSI Lifetime Achievement Award in Materials Science Category (2021)

  • INSA Gold Medal for Young Scientists-1990 by Indian National Science Academy, New Delhi

  • International Young Scientist Fellowship of International Union of Crystallography (IUCr), (ICQ4) St. Louis, USA (1992)

  • ALEXANDER von HUMBOLDT Fellowship, Germany (2003)

  • NATIONAL METALLURGY DAY AWARD: ‘METALLURGIST OF THE YEAR- 2006’, by Ministry of Steel, Govt. of India (2006)

  • Nijhawan Award (2004), awarded by National Metallurgical Laboratory (NML) (Council of Scientific and Industrial Research) (2004)

  • Misra Award (2005), awarded by Institution of Mineral Engineering, Chennai (2005)

  • MRSI Medal for 2008, awarded by Materials Research Society of Metals, India (2008)

  • Eminent Materials Engineer -2010, awarded by Institution of Engineers (India), Kolkata (2010)

  • Prof. C.N.R. Rao Education Foundation Award, awarded by Banaras Hindu University, Varanasi (2010)

  • ASM-IIM North America Visiting Lectureship Award (2014-15), ASM International, USA & IIM Kolkata

  • Prof. A.K. Seal Memorial Lecturer (2014), Institution of Engineers (India), Kolkata

  • INAE Chair Professorship (2015-2017), Indian National academy of Engineering (INAE), India

  • HAG Professorship (2012- continuing), IIT (BHU) Varanasi (w.e.f. August 2012)

  • IIM-G.D. Birla Gold Medal-2016 Award and Lecture 2016

  • Distinguished Educator Award by Indian Institute of Metals, 2019, Thiruvananthapuram, India

  • Member, Board of Governors, IIT (BHU) 2017-2019

  • Co-Chair (with Prof. B.S. Murty), Organizing Committee, International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM-2019), IIT Madras, Chennai, India

  • Member, Programme Advisory Committee (PAC) on Materials, Mining and Minerals, SERB, DST, Government of India, New Delhi (2018-21)

  • Member, INAE Travel Committee, Indian National Academy of Engineering, New Delhi

  • Member, CSIR-Engineering Sciences Research Committee, New Delhi (2019-22)

  • Key-Reader Appreciation certificate (best performance) from Metallurgical and Materials Transactions A (2008), (2009) (2013)

  • Listed in top 2% of most-cited materials scientists in 2022 (Agency: Stanford University) 

Elected Fellows/Members:

  • Elected FELLOW, Indian National Science Academy, India (INSA) (FNA) (elected in 2023, effective from 2024)

  • Elected FELLOW, National Academy of Sciences, India (NASI) (FNASc) (2021)

  • Elected FELLOW, Indian National Academy of Engineering (FNAE), (2009)

  • Elected FELLOW, Asia Pacific Academy of Materials (FAPAM) (2017)

  • Elected FELLOW, Electron Microscope Society of India (FEMSI), (2013)

  • Elected FELLOW, West Bengal Academy of Science and Technology (FAScT) (2015)

  • Elected FELLOW, Indian Institute of Metals (FIIM), Kolkata (2007)

  • Elected FELLOW, Institution of Engineers (India) (FIE), Kolkata (2003)

Elected Member, International and National bodies
 

  • Member, Aperiodic Commission, International Union of Crystallography (IUCr)  (2008-2017) (UK) 

  • Consultant Member, Aperiodic Commission, International Union of Crystallography (IUCr) (2017-2020) (UK)

  • Consultant Member, Electron Diffraction commission, International Union of Crystallography (IUCr) (2005-2008) (UK)

  • Member, International Advisory Board, Quasicrystals (ICQ10) (2006-2008) (Switzerland)

  • Member, International Advisory Board, Quasicrystals (ICQ11) (2008-2010) (Sappro, Japan)

  • Member, International Advisory Board, Quasicrystals (ICQ12) (2010-2013) (Poland)

  • Member, International Advisory Board, Quasicrystals (ICQ13) (2013-2016) (Nepal)

  • Member, International Advisory Board, Quasicrystals (ICQ14) (2016-2019) (Slovania)

  • Member, International Advisory Committee on Mechanochemistry and Mechanical Alloying, (INCOME) USA (2003-2011)

  • Member, IV International Conference Fundamental Bases of Mechanochemical Technologies (FBMT-2013), Novosibirsk, Russia, June 25-28, 2013

  • Life Member, Materials Research Society of India

  • Elected Life Member, Society for Failure Analysis (FLM-SFA-0206)

  • Life Member, Indian Association of Crystallography, (2008)
  • Life Member, Powder Metallurgy Association of India

  • Council Member, the Indian Institute of Metals, Kolkata (2006-2009, 2012-2016, 2016-2018)

  • Member, Education and Examination Committee, Indian Institute of Metals, Kolkata (2006-2016)

  • Member, Metallurgical and Materials Engineering Division Board, Institution of Engineers (India) (2010-2011)

  • Member, Materials panel, Naval Research Board (NRB), DRDO (2012-2016)

  • Member, Material and Manufacturing Panel, Aeronautical Development Board (ARDB), DRDO, (2011- 2016)

  • Chairman, Indian Institute of Metals Varanasi Chapter, Varanasi (2008-2012)

  • Co-Chair for the CAETS 2015 Events Management Committee of Indian National Academy of Engineering (CAETS: Council of Academies of Engineering and Technological Sciences) (2015)

  • Member, Executive Committee of Electron Microscopic Society of India (EMSI), (2014)

  • Vice-President, Electron Microscopic Society of India (EMSI), (2015-2016)

  • Member of BCG Evaluation Committee on Functioning of Indian Institute of Metals, Kolkata (BCG: Boston Consultancy Group, USA) (2015)

  • Member, National Organizing Committee of NMD-ATM 2017, IIT Kanpur, November 11-14, 2017

  • Member, Education, Examination and Human Resources, Indian Institute of Metals, Kolkata (2017-2019)

  • Chairman, IIM-ASM North America Visiting Lectureship Award Committee, IIM (2016-2018)

  • Member, Executive Committee on Electron Microscope Society of India (EMSI) (2017-2020)

  • Member, National Organizing Committee of NMD-ATM 2017, Goa November 11-14, 2017

  • Member, International Advisory Committee (IAC) for 7th International Conference on Solidification Science and Processing (ICSSP 7), Trivandrum, Kerala

  • Member, National Organizing Committee of NMD-ATM 2019, Trivanthapuram, November 14-17, 2019

 
Editorial Board

  • Editor, Transactions of The Indian Institute of Metals, Springer (2023-continuing)

  • Key-Reader (Editorial Board) Metallurgical and Materials Transactions A (USA), Springer (2007-continuing)

  • Editor, Journal of Institution of Engineers, Metallurgical and Materials: Series D, Springer (2010-continuing))

  • Member, Editorial Advisory Committee (2014-17), Transactions of The Indian Institute of Metals, (Springer) (2014-2016)

  • Editor, The Banaras Metallurgists, Dept of Metallurgical Engg, IIT (BHU), (2011-continuing)

 
PROFESSIONAL RECOGNITION:
 

Session Chair

  • Chairing a session on 4th International Conference on 'Quasicrystals' held in St. Louis, USA, May 26-30, 1992.

  • Chairing a session in Int. seminar on Nanoceramics and nanocomposites, Sept. 8-9, 2007, IIT, Kanpur

  • Chairing a session in International conference on Quasicrystals, ICQ8, IISc, Bangalore, September 8-13, 2002.

  • Chairing a session in International conference on RQ12, Korea (August 22-26), 2005.

  • Chairing a session in International conference on NANO 2006, IISc, August 20-25, 2006 Bangalore.

  • Chairing a session in International conference on Int. Workshop on Bulk Metallic Glasses, BMG -2007, IISc, Bangalore January 12-16, 2007, Bangalore.

  • Charing a session in International Symposium on Materials Design, Bangalore October 28, 2007

  • Chairing a technical session in Int. Conf. on Rapidly quenching of metals and materials (RQ10), Bangalore, August 23-27, 1999.

  • Chairing a session in 10th Int. Conf. on Quasicrystals (ICQ10), Switzerland July 6-11, 2008.

  • Chairing a session in EMSI (Electron Microscopy of Society of India) conference 17-19 Jan, 2009, Bundelkhand Univ., Jhansi

  • Chairing a session in Int. conf. ‘Aperiodic Crystals’, (IUCr) Liverpool, UK, 13-18 September 2009

  • Chairing a Technical session in T.R. Anantharaman Memorial session of Annual Technical meeting of NMD-ATM, Indian Institute of Metals, Kolkata November 14-17, 2009.

  • Chairing a session in the National seminar on Synthesis, Characterization and Applications technologically important materials, (SCATIM) BHU, January 5-6, 2010

  • Chairing a Plenary session of Annual Convention of Institution of Engineers, Kolkata, January 15-16, 2010.

  • Chairing a Technical session in NMD-ATM of Indian Institute of Metals, Bangalore, November 14-17, 2010.

  • Chairing and organizing a Microsymposia at XXII IUCr Congress (Madrid, August 22-30, 2011)

  • Chairing and delivering invited lecture in Aperiodic Conference (Aperiodic 2012), Cairns, Australia

  • Session Organizer & Chair, Int. Conf on Electron Miscroscopy and Annual Technical Meeting of Electron Microscope Society of India (EMSI), (Session: Aperiodic Structures) Kolkata, July 3-5, 2013

  • Chaired a session in the International Conference on Emerging Materials and Processes, (ICEMP 2014), (February 26-28, 2014)

  • Chairing a session and delivering an invited talk in NMD-ATM 2014 at Pune (13-16 November 2014)

  • Session Organizer, Int. Conf on Electron Miscroscopy and Annual Technical Meeting of Electron Microscope Society of India (EMSI), (Session: Aperiodic Structures) Mumbai, July 3-5, 2015

  • Organising (Chairman, Technical Committee) an International Conference on Electron Microscopy and Annual Technical Meeting of Electron Microscope Society of India (EMSI), Varanasi May 1-4, 2016.

  • Organising (as Vice-Chairman) an International Conference on Metals and Materials Research (ICMR 2016), Bangalore, June 22-24, 2016.

  • Chairing a session in IIM-NMD-ATM 2016 (November 11-14, 2016, IIT Kanpur)

  • Chairing a session in International Conference on Microscope & XXXIX Annual Meeting of Electron Microscope Society of India at Bhubaneswar, Odisha (18-20 July, 2018).

  • Chairing a Technical session in NMD-ATM 2018 of Indian Institute of Metals, Kolkata, November 14-16, 2018

  • Co-Chair, International Symposium on Metastable, Amorphous & Nanostructure Materials (ISMANAM-2019) on July 06, 2019, Chennai, India.

 
INVITED LECTURES/ VISITS

  • Delivering an invited talk in 28th National Metallurgists' day and 44th Annual Technical Meeting organized by Indian Institute of Metals at Tiruchirapalli, India, November, 1990.

  • Invitation to talk in National Seminar on 'Crystallography' at Varanasi, India, December, 1988.

  • Invitation to talk on plenary session on 5th International conference on quasicrystals, May 22-26, 1995.

  • Invitation to talk in National Seminar 'Quasicrystals and related Intermetallics', Dept. of Physics, BHU, Varanasi (Jan.1996)

  • Invitation to talk in 'Analytical Electron Microscopy', in Workshop on 'Crystallographic Techniques in Electron Microscopy', Dept. of Metallurgical Engg., BHU, Varanasi (Feb.1996)

  • Invitation to talk in 'International Conference on 'Quasicrystals' under MRSI, in IISc, Bangalore (13-14th October, 1998)

  • Invitation to deliver a talk in National seminar on ‘Materials Characterization Techniques’, NML (CSIR), Jamshedpur (Jan19-20,1999)

  • Invitation to visit Institute for Materials Research, McMaster University, Canada, May 15-July 14, 1999, and May 15-June 30, 2000 as visiting scientist

  • Invitation to give a lecture in Int. Conf. Aperiodic 2000, Netherlands, July 4-8, 2000.

  • Invitation to deliver a lecture in MRS symposium, Boston, USA, Nov..27-01 Dec.2000.

  • Invitation to deliver a lecture and Chairing a technical session in the conference “Perspectives in Physical Metallurgy and materials science (PPMMS-2001)”, IISc, Bangalore July 12-14,2001

  • Invited lecture in Int. conferences in Advances in Materials Engineering, 4-6 July, 2007, IISc, Bangalore

  • Invited Lecture on Int. seminar on Nanoceramics and nanocomposites, Sept. 8-9, 2007, IIT, Kanpur

  • Invitation to present a lecture on Advanced Materials Processing, Singapore December 16-17, 2007

    Invited Key-note Lecture in Indo-Japan workshop on Composite and high temperature composites, BHU, January 17-19, 2008


  • Invited note Lecture in AGM, MRSI in Trivanathapuram, February 14-16, 2008

  • Invitation to deliver a lecture in Advances in Metals and Materials Processing, China, September 2008

  • Invitation to TU-Dresden, Germany under revisit of AvH Fellowship (June, 2005)

  • Invited as Visiting Professor at Yonsei University, Seoul, Korea (June 2006)

  • Invited to deliver a talk in 4th Asian Conference, Xian, China 24-26 Sept. 2006

  • Invited Talk in Int Conf on Mechanochemistry and Mechanical alloying (INCOME 2008), Jamshedpur 1-4 December 2008

  • Delivering an invited talk in EMSI (Electron Microscopy of Society of India) conference 17-19 Jan, 2009, Bundelkhand Univ., Jhansi

  • Invited talk in the Symposium of Nano Materials, organized on the occasion of 75th year of Prof C.N.R. Rao, BHU, Varanasi (6-9 July) 2009.

  • Invited talk in Int. conf. ‘Aperiodic Crystals’, (IUCr) Liverpool, UK, 13-18 September 2009

  • Key note lecture in a Technical session in T.R. Anantharaman Memorial session of Annual Technical meeting of NMD-ATM, Indian Institute of Metals, Kolkata November 14-17, 2009.

  • Invited talk in a technical session in the National seminar on Advanced characterization techniques in technologically important materials, BHU, January 5-6, 2010

  • Invited Talk in National Symposium on ‘Nanomaterials in Engineering & Technology, HMFA memorial Institute of Engineering & Technology, Handia, Allahabad February 19-20, 2011.

  • Invited talk in National Seminar on Recent Trends in Condensed Matter, Department of applied Physics, IT-BHU, Varanasi March 5-6, 2011.

  • Invited Talk in National Conference on ‘Nanomaterials & Application: Present Position and Road Ahead (NAPRA-2011), DST Nanoscience & Technology Unit, BHU, Varanasi, March 16-18, 2011.

  • Invitation to Plenary talks in International Conference on Mechanochemistry and Mechanical alloying (INCOME 2011), Montenegro, August 31-September 3, 2011

  • Member, National Organising Committee, International Conference on Electron Microscopy (EM50), Electron Microscopic Society of India (EMSI), Hyderabad July 6-8, 2011.

  • Invited Talk in Int. Conf on Electron Miscroscopy and Annual Technical Meeting of Electron Microscope Society of India (EMSI), Kolkata, July 3-5, 2013

  • Delivered an invited talk in the International Conference on Emerging Materials and Processes, (ICEMP 2014), (IIMT, Bhubaneswar, February 26-28, 2014).

  • Invited to deliver Lecture in UGC Networking Resource Centre- Materials (NRC-M) symposium on ‘Severe Plastic Deformation & Bulk nanostructured Materials, (IISc, Bangalore, May 12-14, 2014)

  • Invited talk, in International Conference on Quasicrystal (ICQ-12), Krakow, Poland September 1-6, 2013.

  • Invited talk in International Conference on Advanced Materials and Energy Technology,  December 17-19,  2014, at IIEST, Shibpur, West Bengal, India.

  • Invited talk in the workshop on Advances in preparation and characterization of heterogeneous Catalysts, Dept. of Chemical Engg & Technology, June 8-20, 2015 IIT (BHU),

  • Invited Talk in Workshop on “Indian Innovations in Materials Research: New Materials & Processes (IIMR-15)” at CSIR-CGCRI, Kolkata, June 25-27, 2015.

  • Invited Lecture in International Conference on ‘Metastable Microstructures and Electron Microscopy’, MRC, IISc, Bangalore, July 6-7, 2015.

  • Invited Lecture and organized a technical session in International Conference on Electron Microscopy and  XXXVI Annual Meeting of the Electron Microscope Society of India (EMSI) July 8-10, 2015.

  • Invited Lecture in University of Utah, Salt Lake, USA under ASM-IIM lectureship visit September, 23,2015

  • Invitation to deliver a lecture in 6th International Conference on Solidification Science and Processing, ICSSP6-2015, November 24-27, 2015.

  • Invited Lecture in International Conference on Metals and Materials Research (ICMR 2016), IISC, Bangalore, June 20-22, 2016.

  • Invited Lectures: Two lectures in Workshop on Materials Characterization: Principles and Practices, IIEST, Shibpur July 25-August 5, 2016) presentation date: August 1, 2016.

  • Invited Lecture in NMD-ATM 2016, IIT Kanpur (November 11-14, 2016).

  • Invited Lecture in International Conference in Materials Engineering (ICME-2017) at IIT Kanpur, June 2-4, 2017.

  • Plenary Lecture on “Electron Microscopy of nano-crystalline High-Entropy Laves Phase in Ti-Zr-V-Ni-Cr equiatomic alloys” in International Conference on Microscope & XXXIX Annual Meeting of Electron Microscope Society of India at Bhubaneswar, Odisha (18-20 July, 2018).

  • Session Chair in International Conference on Microscope & XXXIX Annual Meeting of Electron Microscope Society of India at Bhubaneswar, Odisha (18-20 July, 2018).

  • Special Lecture in QIP sponsored Short-term Course and Continuing Education Programme on ‘Mechanical Properties and Deformation Behaviour of Structural Materials’ held during 27 August – 1 September, 2018 in Metallurgical Engineering, IIT(BHU).

  • Invited Lecture in National conference on Recent Trends in Condensed Matter Physics and Materials Science, Dept of Physics, BHU, 15-16, September 2018.

  • Invited Lecture in International Advisory Committee (IAC) for 7th International Conference on Solidification Science and Processing (ICSSP 7), Trivandrum, Kerala (November 22, 2018).

  • Invited lecture in International Conference on Advanced Materials and Process for Defense Application, ADHAT-2019, September 23-25, 2019, Hyderabad.

  • Invited lecture on “Phase evolution and their stability in equi-atomic and non-equiatomic high entropy alloys of transition metals and aluminium: Some case studies” in 3rd International Workshop on High Entropy Alloys (IWHEM-2020) held during 7-8 March 2020, Kanpur, India.

  • Invited Lecture in International Symposium on Metastable, Amorphous & Nanostructure Materials (ISMANAM-2019) on July 06, 2019, Chennai, India.

  • Invited Lecture in Asia Pacific Microscopy Conference (APMC-2020), EMSI on February 2020, Hyderabad, India.

  • Expert Lecture in E-STC "Material Characterization Techniques", 24-28 August 2020, NIT Jalandhar

  • Invited Lecture in Material Science & Technology (MS&T 20 Virtual), November 02-06, 2020, USA

  • Invited Lecture in International e-Conference on Structural Materials for Nuclear and Space Applications (SNSA20), December 3-6, 2020, BARC, Mumbai, India. 
  • Invited Lecture in Materials Science & Technology (MS&T 20 Virtual), October 17-20, 2021, USA

  • Invited Lecture in International Conference on Electron Microscopy & XLI Annual Meeting of Electron Microscope Society of India (EMSI-2023), February 08-10, 2023, New Delhi, India.  

  • Keynote Lecture on 'Transmission Electron Microscopy' at Indian Institute of Technology Patna, April 2023

  • Expert Lecture in 'Characterization and Testing of Components Following Laser Materials Processing including Surface Engineering and Additive Manufacturing', March 23.2023, IIT Kharagpur, India

  • Invited Lecture in 4th International Workshop on High Entropy Alloys (IWHEM-2020), April 24-26, 2020, BARC, Mumbai, India

Any other Professional responsibility/ services

  • Awarded Young Scientists Project (SYS) under DST, New Delhi 1998.

  • Member, International Advisory program committee, Nano 2006, Bangalore September 2006

  • Member, International Advisory committee on Mechanochemistry and Mechanical Alloying (INCOME-2006, 2008), Russia July 2-3, 2006 and Jamshedpur, India December 1-4, 2008

  • Member, Editorial Board, Metal News, Indian Institute of Metals, Kolkata (2003-2008)

  • Member, Education and Examination Committee, IIM, Kolkata (2003-2009)

  • Acted as referees for several high impact factor Journals such as Phil. Mag., Mater. Sci. Engg., J. Mater. Sci., etc

  • Acted as Examiner for several Ph.D and M.Tech thesis for IITs, B.E. Colleges, etc.

  • Acted as Examiner for Ph.D thesis from Germany and South Africa.

  • Served as an Expert in the committee of IIT-Delhi for initiating a Materials Science & Engineering Program in IIT Delhi. Participated in formulating the course structure meeting in January 20, 2018.

  • Served as an Expert in the committee of IIT-Jammu for initiating a Materials Engineering Program in IIT Jammu. Participated in formulating the course structure.

  • Council Member and Member of Advisory Committee of Publication Committee and Education & Examination Committee of IIM, Kolkata July 28, 2018.

PROFESSIONAL EXPERIENCE (Foreign Academic Visit):
(period, place, purpose and person concerned)
 

  • 1990 (Dec.6-10th): (UK) Cambridge University, delivered a lecture on "Evolution of microstructural and diffraction features in complex quasicrystalline intermetallics" and interacted with students and faculty members of the Department of Materials Science and Metallurgy. Contact Person: Dr. A.L. Greer and Dr. K. M. Knowles.

  • 1990 (Dec.)- 1994(March): (CANADA) Department of materials science and engineering, and Institute for Materials Research, McMaster University. Involved in Postdoctoral research for 3 years with Profs. G.C. Weatherly and J.D. Embury; and delivered a series of lectures on structure and mechanical properties of new materials.

  • 1992 (May 22-30th): (USA) Department of Physics, University of Washington, St.Louis. Chaired a session and presented a paper on 'synthesis and characterization of quasicrystals in rapidly solidified Al-Fe-W alloys' at 4th international conference on 'quasicrystals', and also interacted with students and scientists. Contact Person: Dr. K. F. Kelton, Dr. P. C. Gibbons.

  • 1991 (Jan.15-20th and April'10-15th): (CANADA) R& D Centre of ALCAN, (Aluminum Canadian Company), Kingston, Canada, interacted with Dr.D.J. Lloid regarding projects of quasicrystalline thin films and conducted some experiments and interacted with other scientists.

  • 1995 (May 26th - June 2nd): (FRANCE) Avignon, France. Presented a paper on 'Electron Microscopy of Decagonal phases in Al-Co-Cu System' (invited as one of the 14 speakers in oral presentation in 5th international conference on quasicrystals'), Contact Persons: Dr. J.M. Dubois and Dr. D. Gratias.

  • 1997 (May 22- June 15): (JAPAN) A paper on 'Short range and Long range ordering transformation in quasicrystals and related crystal' was presented in 6th International Conference on Quasicrystals, University of Tokyo, Tokyo, (ii) Visited University of Nagoya (UN), Himeji Institute of Technology (HIT) and Tsukuba Centre for National Research Institute of Metals (NRIM) for giving lecture and developing contacts for collaborative work with Dr. T. Ishimasa of UN, Dr.Y.Ishii of HIT, and Dr. A.P Tsai of NRIM.

  • 1999 (May 15-July 14,1999): (CANADA) Visited Brockhouse Institute for Materials Research, McMaster University, Canada as a visiting scientist for two months for exploring future collaborative Projects and interacting with the scientist, on invitation from Prof. G.C. Weatherly, Director, Institute for Materials Research. Attended 13th national seminar on Metals Sciences, Kingston, Canada, 14-18 June, 1999.

  • 2000 (May- June): (CANADA) Visited Brockhouse Institute for Materials Research, McMaster University, Canada as a visiting scientist for collaborative research work, invitation from Prof. G.C. Weatherly, Director, Institute for Materials Research.

  • 2000 (July 2- July 8): (Netherlands) Visited Nijmegen University to deliver an invited talk in Int. Conf. on Aperiodic Crystals (Aperiodic-2001); Contact Person: Prof. T. Jannsen.

  • 2001 (Sept. 23- Oct.4, 2001) (Japan) To Attend an International Conference on “Quasicrystals-2001” in Sendai and spend a 5 days in Tokyo University with Prof. K. Edagawa. Contact person: Dr. A.P. Tsai for the conference.

  • 2003 (July) -2004 (June) (GERMANY): Visited TU-Dresden, Germany for working on micro- and naoindentation of novel materials under Alexander von Humboldt Research Fellowship with Prof. P. Paufler.

  • 2005 (May-21-June 2) (USA) : Visited Ames Lab., Iowa State University and University of Minnesota, Mineapolish (USA) and attended an Int. conference ICQ9 in Iowa State University. Prof. P. Thiel, Prof. C. Jenks and D. Sordelet.

  • 2005 (June 3-June 30) (GERMANY): Visited Institute of Structural Physics, TU. Dresden, Germany as a visiting scientist under Humboldt re-visit program; Prof. P. Paufler.

  • 2005 (August 21-29) Seoul, Korea: Visited Jeju to attend an Int. Conf. on Rapidly quenched and metastable materials (RQ12) and also chaired a session on Bulk Metallic Glasses. Subsequently visited Korea Institute of Science and Technology (KIST) at Seoul for 3 days. Contact Person: Prof. D.H. Kim, Dr. J.W. Park (KIST) and Dr. D. Kum (KIST)

  • 2006 (June 8-July 8) Seoul, Korea: Visited as a Visiting Professor in the University of Yonsei, Seoul, Korea. Contact Person Prof. D.H. Kim.

  • 2006 (September 17-22), Sendai, Japan: To attend Int. Conf. Aperiodic 2006, Zao, Miyagi and to visit IMR, Tohoku University and to deliver a lecture. Prof. A.P Tsai and Prof. A. Inoue (Tohuku University)

  • 2006 (September 22-24) Xian, China: To attend 4th Asian Workshop in Xian on ‘Quasicrystals’ and to deliver an invited lecture; Contact person: Prof. C. Dong

  • 2007 (October 13-19) TelAviv, Israel: To attend international conference on ‘Quasicrystals: Silver Jubilee’ and to deliver a lecture; Contact person: Prof. R. Lifshitz, Prof. D. Shechtman

  • 2008 (May-July) Dresden, Germany: To visit under Alexander von Humboldt Foundation, Germany under re-visit program with renewed research fellowship, IFW Dresden, Contact person: Prof. J. Eckert

  • 2008 (July 7-11) Zurich, Switzerland: To attend an International Conference on quasicrystals (ICQ10) at Zurich, Switzerland and to chair a technical session and present a paper. Prof: W. Steurer.

  • 2009 (September 12- 19) Liverpool, UK: To chair a session and deliver a talk in Int conf. on Aperiodic Crystals”, IUCr, Liverpool, UK, Contact Person: Prof. R. McGrath.

  • 2011 (June 1-30) IFW-Dresden, Germany: To visit under Humboldt re-visit program to continue collaborative research work. Contact Person: Prof. J. Eckert

  • 2011 (August 22-30) Madrid, Spain: To attend the Congress of International Union of Crystallography (IUCr) at Madrid, Spain and to organize and conduct the session as co-chair on ‘Aperiodic crystals’ as well as to attend the meeting of Aperiodic commission. Contact Person: Marc de, Boissieu

  • 2012 (September 2-7, 2012) Cairns, Australia: To attend the International conference on Aperiodic Crystal (Aperiodic 2012) of International Union of Crystallography, (IUCr), at Cairns, Australia and to attend the meeting of the commission, present an invited talk and chair a technical session. Contact Person: Prof. R.L. Wither.

  • 2013 (September  1-6, 2013) Krakow, Poland: To attend the International Conference on ‘Quasicrystals’ (ICQ12), deliver an invited talk and chair a technical session. Contact Person:  Prof. J. Wolny.

  • 2014 (May 21- July 20) IFW-Dresden, Germany: To visit as Guest Scientist under Humboldt re-visit program to continue collaborative research work. Contact Person: Prof. J. Eckert

  • 2015 (September 21-26, 2015): University of Utah, USA: To visit as ASM-IIM visiting Lecturer and deliver the lectures under this program. Contact Person: Prof. K.S. Ravichandran.

PUBLICATIONS

  • No. of Papers published in refereed Journals and Conf. Proceedings ~211+

  • No. of Conference Presentations: ~130 (National: 75 and International: 55)

  • No. of Lectures delivered on invitation in various Institutes/organization: 25

  • Projects completed -21, (including Industrial Projects)

  • No. of citations of published papers: ~ 4800+; h-index~35+; i10~120+

  • The work has been cited in the classics text books and reference book in (i) Physical Metallurgy by R.W. Cahn, in (ii) Phase Transformation by J.W. Christian and in (iii) Quasicrystals (in Chinese) by K.H. Kuo, and in many other international review articles.

  • Invited to write a Review on Micro- and nanoindentation in the International Materials Reviews (2006) based on his contribution in mechanical characterization using indentation techniques.

  • Invited to write an article on his work on quasicrystal in the Special Issue of Israel Journal of chemistry published on the occasion of Nobel Prize being awarded in 2011 to Prof. D. Shechtman for discovery of quasicrystals in 1984.

  • No. of B. Tech. Projects guided: 80;
  • M. Tech Theses: 47 (completed) + 3 (in progress);
  • Ph.D. Theses: 13 (completed) + 7 (in progress).

 

LIST OF PUBLICATIONS (in Referred Journals and Proceedings)
(https://scholar.google.com/citations?hl=en&user=5F_wAXUAAAAJ&view_op=list_works&sortby=pubdate)
 

  1. N.K. Mukhopadhyay, G.N. Subbanna, S. Ranganathan and K. Chattopadhyay, "An electron microscopic study of quasicrystals in quaternary alloy: Mg32(Al,Zn,Cu)49", Scripta Metallurgica20,(1986) 525.


  2. N.K. Mukhopadhyay, N. Thangaraj, K. Chattopadhyay and S. Ranganathan, "A comparative electron microscopic study of Al based and Mg based quasicrystals", Journal of Materials Research2, (1987) 299.

  3. N.K. Mukhopadhyay, S. Ranganathan and K. Chattopadhyay,"On the short-range order in Al-Mn quasicrystals during low temperature ageing", Philosophical Magazine Letters56, (1987) 121.

  4. K. Chattopadhyay and N.K. Mukhopadhyay, "The nature of early stages of decomposition of icosahedral quasicrystals", Materials Science Forum22-24, (1987) 639.

  5. N.K. Mukhopadhyay, G.N. Subbanna, K. Chattopadhyay and S. Ranganathan, "Electron microscopy of quasicrystals in Al-Mn-Ge system”,in Proc. Pacific Conferences on `Electron Microscopy', Bangkok, Thailand, (1988),p:187.

  6. N.K. Mukhopadhyay, K. Chattopadhyay and S. Ranganathan, "Synthesis and structural aspects of quasicrystals in Mg-Al-Ag: Mg4Al6Ag", Metallurgical Transactions A., 20, (1989) 805.

  7. S.Ranganathan, R. Prasad and N.K. Mukhopadhyay, "Electron microscopy and diffraction of icosahedral twins in an aluminium- manganese alloy", Philosophical Magazine Letters59, (1989) 257.

  8. N.K. Mukhopadhyay, S. Ranganathan and K. Chattopadhyay, "Evolution of superlattice order in Al-Mn quasicrystal and its relation to face centred icosahedral quasicrystals", Philosophical Magazine Letters60, (1989) 207.

  9. N.K. Mukhopadhyay, "Synthesis of a new icosahedral quasicrystal based on intermetallic compound: E Phase (Mg3Cr2Al18)", Materials Forum, 13, (1989) 228.

  10. K. Chattopadhyay and N.K. Mukhopadhyay, "On the origin of banded microstructure in rapidly solidified alloys: The case of Al-10% Mn quasicrystalline system", Journal of Crystal Growth106, (1990) 387.

  11. N.K. Mukhopadhyay, "Fuzzy arcs promise to clear up quasicrystal structure “, Current Science59, (1990) 584.

  12. N.K. Mukhopadhyay, K. Chattopadhyay and S. Ranganathan,"A new indexing system for decagonal quasicrystals", in `Quasicrystals and Incommensurate structures in Condensed Matter', (eds) M. J. Yacamahan, D.Romeu, V. Castano, A. Gomej, (World Scientific, 1990) p: 212.

  13. N. K. Mukhopadhyay, K. N. Ishihara, S. Ranganathan and K.  Chattopadhyay, "Rational approximant structures and phason strain in icosahedral quasicrystals", Acta Metall. Mater., 39, (1991)1151.

  1. S.Ranganathan, N.K. Mukhopadhyay and K. Chattopadhyay,"Icosahedral quasicrystals", in 'New Materials', (eds) S.K. Joshi, C.N.R. Rao, T. Tsuruta and S. Nagakura (Narosa Publishing House, New Delhi, 1992) p.234.

  2. N.K. Mukhopadhyay, G.C. Weatherly, D.J. Lloyd and J.D. Embury, "Synthesis and characterization of quasicrystals in rapidly solidified Al-Fe-W alloy", Scripta Metall. Mater., 27, (1992) 111.

  3. N.K. Mukhopadhyay, G.C. Weatherly, D.J. Lloyd and J.D.Embury, "Diffraction Studies of icosahedral phases in Al-Fe-W system", Journal of Non Crystalline Solids153-154,(1993) 183.

  1. S. Ranganathan, Alok Singh, N.K. Mukhopadhyay and G.C. Weatherly, "A Comparative study of zone axis pattern maps from decagonal phases with variable periodicity", Scripta Metall. Mater., 30, (1994) 271.

  2. N.K. Mukhopadhyay, G.C. Weatherly and J.D. Embury,"Electron microscopy in decagonal phases in Al-Co-Cu-Si single crystals",in 'Quasicrystals', (eds) C.H. Janot & R. Mosseri, (World Scientific, 1995) p: 206.

  3. A.Mitra, B. Ravikumar, N.K. Mukhopadhyay, G.V.S. Murthy, S.K. Das and D. Bhattacharya,"Residual Stress Evaluationn in service exposed shotpeened spring by micromagnetic and XRD techniques" in 'Recent Trends in NDE Science and Technology', (eds.) B.P.C. Rao et al., ( Oxford & IBH Publ. , New Delhi, 1996), p:879.

  4. A.K. Ray, S.K. Das, S. Maity, N.K. Mukhopadhyay, S.Tarafdar, E.S. Dwarakadasa, “Indentation hardness and fracture toughness of Alumina based ceramics” Interceram46, (1996) 184.

  5. N.K. Mukhopadhyay, K. Chattopadhyay and S. Ranganathan "Diffuse intensity and ordering transformation in icosahedral quasicrystals", Bul. Mater. Sci.19,(1996) 717.

  6. N.K. Mukhopadhyay and Pravesh Kumar, "Miniaturized disk bend test: A small specimen testing technique", in 'Nondestructive Testing and Evaluation', eds. A. Mitra et al. (NML, Jamshedpur, 1997) p:171.

  7. N.K. Mukhopadhyay, "Failure Analysis of Some Industrial components", in 'Recent Advances in Metallurgical Processes', eds. D.H. Sastry et al. (New Age Int. Ltd., New Delhi, 1997)) p: 1405.

  8. N.K. Mukhopadhyay, "Short range and long range ordering in quasicrystals and approximants", in 'Quasicrystals' (eds.) T. Fujiwara et al. (World Scientific, Tokyo, 1997) p.391.

  9. N.K. Mukhopadhyay, "Analysis of Failures due to hydrogen embrittlement", in 'Clinics on Failure Analysis', (eds) S.R. Singh et al., (NML, Jamshedpur, 1997) p:83.

  10. N.K. Mukhopadhyay, S.K. Das, B.Ravikumar, V.R. Ranganath and S. Ghosh Choudhuri, "Premature Failure of Leaf Spring due to improper materials processing", Engineering Failure Analysis4, (1997) 161.

  11. S.Ghosh Choudhury, N.K. Mukhopadhyay, G.Das, S.K. Das and D.K. Bhattacharya, "Failure Analysis of Weld Repaired Steam Turbine Casing", Engineering Failure Analysis5, (1998) 205.

  12. N.K. Mukhopadhyay, S. Ghosh Chowdhury, G. Das, I. Chattoraj, S.K. Das and D.K. Bhattacharya, “An Investigation of the Failure of Low Pressure Steam Turbine Blades”, Engineering Failure Analysis5, (1998) 181.

  13. G.V.S Murthy, A.K. Ray, R.K. Minz and N.K. Mukhopadhyay, "Microhardness and Fracture Toughness studies of Decagonal Quasicrystals in Al-Cu-Co system", Journal of Materials Science Letter18 (1999) 255.

  14. A.K. Ray, G.Das, N.K. Mukhopadhyay, D.K. Bhattacharya, E.S. Dwarakadasa and N. Parida, “Studies on Indentation Fracture Toughness on Ceramic and Ceramic composite using acoustic emission technique”,Bull. Mater. Sci22 (1999) 25.

  15. N.K. Mukhopadhyay, G.V.S. Sastry and G.C. Weatherly, “Electron Microscopiy Study of Striation contrast in Al-Cu-Co-Si Decagonal phases”, Bull. Mater. Sci.22 (1999) 473.

  16. N.K. Mukhopadhyay, S. Ghosh Chowdhury, R.K. Sinha, D.K. Bhattacharys and S. Chaudhuri, “An analysis of remaining life estimation of a service exposed economiser tube of 60 MW boiler”, Engineering Failure Analysis6 (1999) 233.

  17. N.K. Mukhopadhyay, Microanalysis of Material by X-ray Techniques: EDX & WDX in Materials Characterization Techniques –Principles and Applications, Eds. G. Sridhar, S. Ghosh Chowdhury and N.G. Goswami, (1999) pp.151-162.

  18. N.K. Mukhopadhyay, G. Sridhar, N. Parida, S. Tarafder and V. R. Ranganath, “Hydrogen Embrittlement Failure of hot dip galvanised high tensile wires”, Engineering Failure Analysis6 (1999) 253.

  19. G. Sridhar, S.K. Das and N.K. Mukhopadhyay, “Failure Analysis of low carbon free cutting steel wire rods”, Engineering Failure Analysis6, (1999) 155.

  20. N.K. Mukhopadhyay, G.V.S. Sastry and G.C. Weatherly, “Electron Microscopy analysis of decagonal quasicrystals in Al-Cu-Co-Si system”, Phil. Mag.A, 80 (2000)1795.

  21. N.K. Mukhopadhyay and G.C. Weatherly, “Formation of quasicrystalline and vacancy ordered phases in vapour deposited thin films”, Mater. Sci. & Engg.A,304-306 (2000) 855.

  22. N.K. Mukhopadhyay, G.C. Weatherly and G.V.S. Sastry, “On analysis of diffuse intensity and striation contrast in electron microscopy images in Al-Cu-Co-Si decagonal phases”, Mater. Sci. & Engg.A294-296, (2000) 135.

  23. S. Ranganathan, K. Ramakrishnan, U.D. Kulkarni and N.K. Mukhopadhyay, “On the relationship between coincidence site lattice and quasiperiodic superlattices”, Mater. Sci. & Engg.A294-296, (2000) 429.

  24. G.C.Weatherly, A. Perovic, N.K. Mukhopadhyay, D.J. Lloyd and D.D. Perovic, “The precipitation of the Q-  phase in an AA6111 alloy”, Materials and Metallurgical Transaction32A (2001) 213.

  25. N.K. Mukhopadhyay, G.C. Weatherly and J.D. Embury, “An analysis on microhardness of single-quasicrystals in Al-Cu-Co-Si system”, Mater. Sci. & Engg.A, 315 (2001) 202.

  26. N.K. Mukhopadhyay, G.V.S. Murthy, B.S. Murthy and G.C. Weatherly “Transformation of the decagonal quasicrystalline phase to a B2 crystalline phase in Al-Cu-Co system by high energy ball milling”, Phil. Mag. Lett., 82 (2002) 383.

  27. N.K. Mukhopadhyay, G.V.S. Murthy, B.S. Murthy and G.C. Weatherly “An investigation on the transformation of the decagonal phase to a B2 phase in Al-Cu-Co alloy during Mechanical milling” J. Alloys & Compounds, 343 (2002) 38.

  28. M. Abu Shaz, N.K. Mukhopadhyay, R.K. Mandal and O.N. Srivastava, “Synthesis and mechanical property of nanoquasicrystalline phases”, J. Alloys and Compounds343 (2002) 49.

  29. N.K. Mukhopadhyay and E.A. Lord, “Least Path Criterion (LPC) for unique indexing in a 2-dimensional decagonal quasilattice”, Acta Cryst.A 58 (2002) 424.

  30. N.K. Mukhopadhyay, T.P. Yadav and O.N. Srivastava, “An investigation on the transformation of the icosahedral phase in Al-Fe-Cu system during mechanical milling and subsequent annealing”, Phil. Mag. A 82 (2002) 2979.

  31. N.K. Mukhopadhyay, T.P. Yadav and O.N. Srivastava, “Effects of ball milling and annealing in Al-Fe-Cu system: Implications for phase equilibria, Phil. Mag. Lett. 83 (2003) 423.

  32. T.P Yadav, N.K. Mukhopadhyay, R.S. Tiwari and O.N. Srivastava, “Characterization of Mechanically milled Al65Cu20Fe15 icosahedral quasicrystalline alloy’’, Trans.Indian.Inst.Met, 56, (2003) 577.

  33. N.K. Mukhopadhyay, Vinod Kurup, V.C. Srivastava, P.B. Joshi and R.K. Mandal, High Energy Ball milling of Al65Cu20Fe15 Quasicrystalline Alloy, Journal of Non-crystalline solids, 334-335c (2004) 52.

  1. T.P. Yadav, N.K. Mukhopadhyay and O.N. Srivastava, Synthesis of nano-quasicrystalline Al70Ni15Co15 decagonal phase through high energy ball milling, Journal of Non-Crystalline Solids334-335c (2004) 57-61.

  2. B.S. Murty, R. V. Koteswara Rao and N.K. Mukhopadhyay, Stability of quasicrystalline Phase in Al-Cu-Fe, Al-Cu-Co and Al-Pd-Mn systems by high-energy ball milling, Journal of Non-Crystalline Solids, 334-335c (2004) 48.

  3. T.P Yadav, N.K. Mukhopadhyay and O.N. Srivastava, “Synthesis of nano-quasicrystalline decagonal phase’’, Indian Journal Physics,A 78A, (2004) 189

  4. N.K. Mukhopadhyay, Jatin Bhatt, A.K. Pramainck, B.S. Murty and P. Paufler, “Synthesis of nanocrystalline/nanoquasicrystalline Mg32(AlZn)49 by melt-spinning and mechanical alloying, J. Mater. Sci39, (2004) 5155.

  5. C.  Sasikumar, D.S.  Rao, S.  Srikanth, B.  Ravikumar, N.K.  Mukhopadhyay and S.P.  Mehrotra, Hydrometallurgy, “Effect of mechanical activation on the kinetics of sulfuric acid leaching of beach sand ilmenite from Orissa, India”, Hydrometallurgy,75, (2004) 189-204.

  6. N.K. Mukhopadhyay, “Analysis of microhardness data using the normalized power law equation and energy balance model”, Journal of Materials Science40 (2005) 241-244.

  7. T.P Yadav, N.K. Mukhopadhyay , R.S. Tiwari and O.N. Srivastava , “Studies on the formation and stability of nanocrystalline Al50Cu28Fe22 alloy synthesized through high energy ball milling”, Materials Sci. & Engg 393 (2005) 366-373.

  8. M. Reibold, A. Belger, N.K. Mukhopadhyay, P. Gille and P. Paufler, “The impact of nanoindentation at room temperature upon the real structure of decagonal AlCoNi quasicrystals”, Phys. Stat. Sol. 202 (2005) 2267.

  9. C. Sreenivasulu, A.K. Singh, N.K. Mukhopadhyay and G.V.S.Sastry, “ Effect of alloying and aging on morphological changes from lamellar to equiaxed microstructure of α2 + γ titanium aluminides, Metallurgical and Materials Transactions A, 36 (2005) 2601.

  10. R. Manna, P. Agarwal, S. Joshi, B.V. Mudda, N.K. Mukhopadhyay, and G.V.S. Sastry, “Physical modeling of ECAP processing of plasticine”, Scripta Metall.53 (2005) 1357.

  11. N.K. Mukhopadhyay, V.S. Sarma and S. Shankaran, “An analysis of the microindentation data obtained from a thermomechanically processed multiphase microalloyed steel”, Trans Indian Inst. Met 58 (2005) 809-818.

  12. T.P Yadav, N.K. Mukhopadhyay, R.S. Tiwari and O.N. Srivastava, “On the evolution of Nanocrystalline phase from the Al-Fe-Cu quasicrystalline alloy during high energy ball milling”, Trans Indian Inst. Met. 58. (2005) 1169-1176.

  13. T.P Yadav, N.K. Mukhopadhyay, R.S. Tiwari and O.N. Srivastava,” Superstructure in Nano-Crystalline Al50Cu28Fe22 Alloy”, in Proc. of the International conference on Nanomaterials, (2005) pp.323-330.

  14. T.P Yadav, N.K. Mukhopadhyay, M.A. Shaz, R.S. Tiwari and O.N. Srivastava, “Phase transformation in Al70Ni24Fe6 Decagonal system during High energy Ball Milling”, Phil. Mag 86, (2006) 397.

  15. N.K. Mukhopadhyay, A. Belger, P. Paufler and P. Gille, “Micro- and nanoindentation studies of Al-Co-Ni single decagonal quasicrystals”, Philosophical Magazine 86, (2006) 999.

  16. N.K. Mukhopadhyay and P. Paufler, “Micro- and nanoindentation techniques for mechanical characterization of Materials”, International Materials Reviews .51 (2006) 209-245.

  17. C. Sasikumar, D.S. Rao, S. Srikanth, N.K. Mukhopadhyay and S.P. Mehrotra, “An Investigation of the Effect of Mechanical Activation On Leaching Kinetics of Ilmenite with HCl and H2SO4”, Metals, Materials and Processes 18 (2006) 211-224.

  18. T.P Yadav, N.K. Mukhopadhyay, R.S. Tiwari and O.N. Srivastava, “Synthesis of nanocrystalline (Co,Ni)Al2O3 spinel powder by mechanical milling of quasicrystalline material”, Journal of Nano-Science and Technology7 (2007) 1-5.

  19. S.K. Das, N.K. Mukhopadhyay, D.K. Bhattacharya and B. Ravi Kumar, “Failure Analysis of a Passenger Car Coil Spring”, Engineering Failure Analysis14 (2007) 158-163.

  20. S. Ranganathan, E. Lord, N.K. Mukhopadhyay and A. Singh, “Rationalization of indexing schemes and zone axis laws for decagonal quasicrystals”, Acta Crystallographica. A 63 (2007) 1-10.

  21. N.K. Mukhopadhyay, A. Belger, P. Paufler and D.H. Kim, “Nanoindentation studies Cu based bulk metallic glasses”, Materials Science and Engineering A, 449-451 (2007) 954-957.

  22. T.P Yadav, N.K. Mukhopadhyay, R.S. Tiwari and O.N. Srivastava, “On the evolution of quasicrystalline and crystalline phase in rapidly quenched Al-Co-Cu-Ni Alloy”, Materials Science and Engineering A 449-451 (2007) 1052-1056.

  23. T.P Yadav, N.K. Mukhopadhyay, R.S. Tiwari and O.N. Srivastava,” Study of the formation of nano vacancy odered phases in Al-Cu-Ni by mechanical alloying”, Journal for Sustainable Development 15 (2007) 259-263.

  24. T.P Yadav, N.K. Mukhopadhyay, R.S. Tiwari and O.N. Srivastava, “On the stability of Al-Ni-Fe decagonal phases after milling and annealing”, Philosophical Magazine 87 (2007) 3117-3125.

  25. 74. N.K. Mukhopadhyay, Q. Jian-Bing, V.S. Sarma and C. Dong, “Nanoindentation studies on Ti-Zr-Ni polyquasicrstalline samples”, Philosophical Magazine 87 (2007) 3109-3115.

  26.  Sasikumar, D.S. Rao, S. Srikanth, N.K. Mukhopadhyay and S.P. Mehrotra, “Dissolution Studies of Mechanically Activated Manavalakurichi Ilmenite with HCl and H2SO4”, Hydrometallurgy88 (2007) 154-169.

  27. T.P Yadav, N.K. Mukhopadhyay, R.S. Tiwari and O.N. Srivastava,” Formation of nano vacancy ordered τ3 phases in Al-Cu-Ni system by mechanical alloying”, Phil. Mag. Lett.87 (2007) 781-789.

  28. N.K.  Mukhopadhyay, D.  Mukherjee, S.  Dutta, R.  Manna, D.H.  Kim and I.  Manna, “Synthesis and Characterization of nanocrystalline and amorphous (Al4Cu9)94.5Cr5.5 -brass alloys by rapid solidification and mechanical milling”, Journal of Alloys and Compounds 457 (2008) 177-184.

  29. N.K. Mukhopadhyay, D. Mukherjee, S. Bera, I. Manna, and R. Manna, “Synthesis and Characterization of nano-structured Cu-Zn -brass alloy”, Materials Science & Engineering A 485 (2008) 673-680.

  30. R. Manna, N.K. Mukhopadhyay and G.V.S. Sastry, “Effect of equal channel angular pressing on microstructure and mechanical properties of commercial purity aluminum” Metallurgical and Materials Transaction 39 (2008) 1524-1534.

  31. N.K. Mukhopadhyay, A. Belger, P. Paufler, E. Uhrig, S. Brühne and W. Assmus, “Nanoindentation studies on single crystals of Zn-Mg-Er and Zn-Mg-Ho quasicrystalline phases”, J. Alloys and Compounds466 (2008) 160-164.

  32. T.P Yadav, N.K. Mukhopadhyay, R.S. Tiwari and O.N. Srivastava,” Low temperature synthesis of spinels phase in Al-Ni-Fe decagonal alloys by mechanical milling”, Phil. Mag. 88 (2008 2227-2236.

  33. T.P Yadav, N.K. Mukhopadhyay, R.S. Tiwari and O.N. Srivastava,”Evolution of nanocrystalline spinel structure using quasicrystalline precursor”, Int. J. Applied Ceramic Technology, 5 (2008) 449-457.

  34. V.C Srivastava, V. Uhlenwinkel, A. Schultz, H.W. Zoch, N.K. Mukhopadhyay, S.G. Chowdhury, “Synthesis of single phase i-AlCuFe bulk quasicrystal by spray forming”, Zeitshcrift fuer Kristallographie223 (2008) 711-715.

  35. N.K. Mukhopadhyay, T.P. Yadav, R.S. Tiwari, O.N. Srivastava, “Synthesis of nanocrystalline spinel phase by Mechanical Milling of Al-Cu-Fe and Al-Cu-Cr-Fe quasicrystalline alloys”, Zeitshcrift fuer Kristallographie223 (2008) 716-720.

  36. B. Basu, Manisha and N.K. Mukhopadhyay, “Understanding the Mechanical properties of Ba doped S-Phase Sialon Ceramics”, Journal of European Ceramic Societies, 29 (2008) 801-811.

  1. N.K. Mukhopadhyay, J.Y. Lee, H.J. Chang and D.H. Kim “Electron microscopy of an icosahedral phase in rapidly solidified Al18Mg3Mn2 complex metallic alloy”, Scripta Materialia59 (2008) 1119-1122.

  2. R.S. Tiwari, T.P. Yadav, N.K. Mukhopadhyay, M.A Shaz, O.N. Srivastava, “Nanocrystallization and Structural Correlation in Quasicrystalline and Crystalline Phases during Mechanical Milling”, Zeitshcrift fuer Kristallographie224 (2009) 26-30.

  3. C. Sasikumar, S. Srikanth, N.K. Mukhopadhyay, S.P. Mehrotra, “Energetics of mechanical activation-application to ilmenite”, Minerals Engineering22 (2009) 572-574.

  4. T.P Yadav, N.K. Mukhopadhyay, R.S. Tiwari and O.N. Srivastava,” Evolution of Nano-Crystalline phases in Al-Ni-Co-Cu alloys”, J. Nanoscience & Technology, 9 (2009) 5527-5532.

  5. R. Manna, N. K. Mukhopadhyay and G.V. S. Sastry, “Mechanism of Microstructural Refinement Operative during Equal Channel Angular Pressing of Aluminum Zinc Alloys.” Proc 30th Risø Intl Sym on Mater Sc:Nanostructured metals-Fundamentals to application, Risø National Laboratory, Denmark, 2009, pp.245-252.

  6. A.K. Chaubey, B.K Misra, N.K. Mukhopadhyay and P.S. Mukherjee, “Effect of the Al-Ti-C preform on the synthesis of    in-situ Mg–TiC composites”, J. Mater. Sci45 (2010) 1507-1513.

  1. D. Mukherjee, V. Ande, R. Manna, B.S. Murty and N.K. Mukhopadhyay, “On the formation of nanostrctured and amorphous Al-Mg alloys by rapid solidification and mechanical milling”, Mater. Sci. Engg A 527 (2010) 5078-5083.

  2. T.P Yadav, N.K. Mukhopadhyay, R.S Tiwari and O.N. Srivastava, “Low Temperature Synthesis And Optical Properties Of (Cu,Cr,Fe)Al2o4 Nanocrystalline Spinel Materials”, International Journal of Nanosciences, 1 (2010) 1-4.

  3. N.K. Mukhopadhyay, “Synthesis of Nanocrystalline and Amorphous Phases in Complex Metallic Alloys during Mechanical milling”, in Frontiers in Mechanochemistry and Mechanical Alloying, Eds. R.Kumar, S. Srikanth, S. P. Mehrotra (National Metallurgical Laboratory, Jamshedpur, 2011) pp.171-177.

  4. A.K. Chaubey, B.K Misra, N.K. Mukhopadhyay and P.S. Mukherjee, “Effect of compact density and  preheating temperature of the Al-Ti-C preform on the fabrication of in-situ Mg–TiC composites”, in Frontiers in Mechanochemistry and Mechanical Alloying, Eds. R.Kumar, S. Srikanth, S. P. Mehrotra (National Metallurgical Laboratory, Jamshedpur, 2011) pp.215-218.

  5. T.P Yadav, N.K.  Mukhopadhyay, R.S Tiwari and O.N.  Srivastava, “Mechanically induced phase  transformation in Al-Cu- Fe-Cr decagonal quasicrystalline alloy by high-energy ball milling” in Frontiers in Mechanochemistry and Mechanical Alloying, Eds. R.Kumar, S. Srikanth, S. P. Mehrotra (National Metallurgical Laboratory, Jamshedpur, 2011) pp.196-199.

  6. N.K. Mukhopadhyay, F. Ali, S. Scudino, V.C. Srivastava, M. Sakaliyska, K.B. Surreddi, , V. Uhlenwinkl, J. Eckert, Mechanical milling of spray-formed single-phase Al-Cu-Fe quasicrystals: Effect of milling intensity, Phil. Mag 91 (2011) 2482-2490.

  7. N.K. Mukhopadhyay and T.P Yadav, “Some aspects of stability and nanophase formation in quasicrystals during mechanical alloying”, Israel Journal of Chemistry51 (2011) 1185-1196 (Nobel Prize issue on quasicrystals for Nobel Prize award to D. Shechtman for discovery of quasicrystals).

  8. T.P Yadav, N.K. Mukhopadhyay and O.N. Srivastava, “High energy Ball Milling of Al-Cu-Fe-Cr Decagonal Quasicrystalline alloys for formation of nanospinel”, Materials and Manufacturing Processes27 (2012) 620-625.

  9. R. Manna, N.K. Mukhopadhyay and G.V.S. Sastry, “On the mechanism of grain refinement during ECAP of Al”, Materials Science Forum710 (2012) 241-24.

  10. F. Ali, S. Scudino, G.Liu, V.C. Srivastava, N.K. Mukhopadhyay, K.B. Surreddi, M. Sakaliyska, M. Samadi Khoshkhoo, V. Uhlenwinkl, J. Eckert, “Mechanical behaviour of quasicrystalline-reinforced Al-based metal matrix composites”, J. Alloys and Compounds, 536 (2012) S130-S133.

  11. A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, B.K. Mishra and J. Eckert, “Effect of particle dispersion on the mechanical behavior of Al-based metal matrix composites reinforced with nanocrystalline Al-Ca intermetallics”, J. Alloys and Compounds, 536 (2012) S134-S137.

  12. A.K. Chaubey, S. Scudino, K.G. Prashanth, M. Stoica, G. Vaughan, N.K. Mukhopadhyay, B.K. Mishra, J. Eckert,” Phase transitions in Al3Ca8 and Al14Ca13 intermetallic compounds induced by milling and annealing”, Materials Letter79 (2012) 145-147.

  13. M. Bohra, M.C. de Weerd, V. Fornee, R.K. Mandal, N.K. Mukhopadhyay, R. Chatterjee and G.V.S. Sastry, “Structural, tribological and resistivity studies of Ga substituted (Al71-xGa) Pd21Mn8 icosahedral and other intermetallic phases”, Journal of Alloys and compounds551 (2013) 274-278.

  14. A. K. Chaubey, S. Scudino, M. S. Khoshkhoo, N.K. Mukhopadhyay, B. K. Mishra and J. Eckert, “Synthesis and characterization of nanocrystalline Mg93.3Al6.7 powders produced by mechanical alloying” Metals, 3 (2013) 58-68.

  15. Rajpal Singh, N. K. Mukhopadhyay, G.V. S. Sastry, R. Manna, “Development of Bulk Ultrafine-grained Cold Reducible Grade Low Carbon Steel produced by Equal-channel Angular Pressing”, in Thermomechanical Simulation and Processing of Steels, (eds) B.K. Jha et al. (Viva Book Publisher, India, 2013) pp. 93-101.

  16. G. Agarwal, H. Agrawal, M. Srinivas, B. Majumdar and N.K. Mukhopadhyay, “Role of Al addition on substitution of Fe substituted Fe73.5-xSi13.5B9Nb3Cu1Alx alloy ribbons”, Buletin of Materials Science, 36, (2013) 613-618.

  17. Rajpal Singh, Santosh Kumar, N. K. Mukhopadhyay, G.V. S. Sastry, R. Manna, “Development of Bulk Ultrafine-grained Cold Reducible Grade Low Carbon Steel produced by Equal-channel Angular Pressing”, International Journal of Metallurgical Engineering, 2 (2013) 62-68.

  18. F. Ali, S. Scudino, S.M. Gorantla, V.C. Srivastava, H.R. Shahid, V. Uhlenwinkel, M. Stoica, G. Vaughan, N.K. Mukhopadhyay, J. Eckert, “Mechanically-driven phase transformation in single-phase Al62.5Cu25Fe12.5 quasicrystal: Effect of milling intensity”, Acta Materialia , 61 (2013) 3819-3830.

  19. N. K. Mukhopadhyay, F. Ali, S. Scudino, M. Samadi Khoshkhoo, M. Stoica, V. C. Srivastava, V. Uhlenwinkel, G. Vaughan, C. Suryanarayana,and J. Eckert, “Grain size softening effect in Al62.5Cu25Fe12.5 nanoquasicrystals”, Applied Physics Letters103 (2013) 2019141-2019145.

  20. V.C.Srivastava, E. Huttunen-Saarivirta, C. Cui, V. Uhlenwinkel, A.Schulz, N.K. Mukhopadhyay, “Development of bulk quasicrystalline materials by spray forming”, in proceedings, 5th Int. Conf. on Spray Deposition and Melt Atomization (SDMA), (Sept 23-25, 2013, Bremen), pp.1-15.

  21. V.C.Srivastava, E. Huttunen-Saarivirta, C. Cui, V. Uhlenwinkel, A.Schulz, N.K. Mukhopadhyay, “Bulk synthesis by spray forming of Al-Cu-Fe and Al-Cu-Fe-Sn alloys containing a quasicrystalline phase”, Journal of Alloys and Compounds597 ( 2014) 258-268.

  22. T.P Yadav, N.K. Mukhopadhyay and O.N. Srivastava, “Synthesis of quasicrystalline materials by mechanical alloying: bulk to nano’, The Banaras Metallurgist19 (2014) 53-64.

  23. N.K. Mukhopadhyay, F. Ali, S. Scudino, M. Samadi Khoshkhoo, M. Stoica, V.C. Srivastava, V. Uhlenwinkel, G. Vaughan, C. Suryanarayana, J. Eckert, “Inverse Hall-Petch like mechanical behaviour in nanophase Al-Cu-Fe quasicrystals: A new phenomenon”, Acta Physica Polonica A 126 (2014) 543-548.

  24. T.P. Yadav, S.S. Mishra, Devinder Singh, M. Lowe, R. Tamura, N.K. Mukhopadhyay, O.N.Srivastava R. McGrath, and H.R. Sharma, “Leaching of Al-based polygrain quasicrystalline and related crystalline surfaces”, Acta Physica Polonica A 126 (2014) 629-632.

  25. T.P. Yadav, N.K. Mukhopadhyay and O.N.Srivastava, “Synthesis of Nano-decagonal quasicrystalline material by Mechanical Alloying”, Applied Science Letters, 20 (2014) 1219-1223.

  26. A.K. Chaubey, S. Scudino, M. Samadi Khoshkhoo, K.G. Prashanth, N.K. Mukhopadhyay, B.K. Mishra and Eckert, “High-strength ultrafine grain Mg-7.4%Al alloy synthesized by consolidation of mechanically alloyed powders”, Journal of Alloys and Compounds610 (2014) 456-461.

  27. M. Raviathul Basariya, V.C. Srivastava and N.K. Mukhopadhyay, “Microstructural characteristics and mechanical properties of carbon nanotube reinforced Aluminium alloy composites produced by ball milling”, Materials & Design64 (2014) 542-549.

  28. P. D. Reddi, N. K. Mukhopadhyay, B. Majumdar, A. K. Singh, S. S. Meena and N. K. Prasad, “Mechanical alloying of Fe-Si-B-Mn based magnetic alloys by high energy ball milling”, Bulletin of Materials Science, (2014) 815-821.

  29. M. Raviathul Basariya, V.C. Srivastava and N.K. Mukhopadhyay, “Effect of milling time on structural evolution and mechanical properties of garnet reinforced EN AW6082 nanocomposites”, Metallurgical and Materials Transaction A 46 (2015) 1360-1373.

  30. N.K. Mukhopadhyay, V. Uhlenwinkel and V.C.Srivastava, “Synthesis and characterization of bulk Al-Cu-Fe based quasicrystals and composites by spray forming”, Journal of Materials Engineering and Performance, (2015) 2172-2178.

  31. MR Basariya, RK Roy, AK Pramanick, VC Srivastava, NK Mukhopadhyay,“Structural transition and softening in Al–Fe intermetallic compounds induced by high energy ball milling”, Materials Science & Engineering A 638 (2015) 282-288.

  32. M. Raviathul Basariya, V.C. Srivastava and N.K. Mukhopadhyay, “Comparative studies on Al-based composites reinforced with garnet and multi-wall carbon nanotubes”, Journal of Materials Engineering and Performance, 24 (2015) 4200- 4205.

  33. Shashank S Mishra, Thakur Prasad Yadav, Semanti Mukhopadhyay, Ram M Yadav, V S Subrahmanyam, N K Mukhopadhyay, O. N. Srivastava, “Rapidly Quenched Ni45Fe5Mn40Sn10 Heusler Alloys”, Materials Research18 (2015) 101-105.

  34. T.P. Yadav, Abu Shaz, N.K. Mukhopadhyay, R.S. Tiwari, O.N. Srivastava, “Phase formation in rapidly solidified Al70-xGaxPd13Mn17 alloy”, Transactions of the Indian Institute of Metals, 68 (2015) 1145-1149.

  35. Deepa Verma, N.K. Mukhopadhyay, G.V. S. Sastry and R.Manna, “Ultra High Strength Interstitial-Free Steel Processed by Equal-Channel Angular Pressing at Large Equivalent Strain”, Metallurgical and Materials Transaction A47 (2016) 1803-1817.

  36. Deepa Verma, Satish Kumar Shekhawat, N.K. Mukhopadhyay, G.V. S. Sastry and R.Manna, Development of Texture in Interstitial-Free Steel Processed by Equal-Channel Angular Pressing for Large Strain, Journal of Materials Engineering and Performance, 25 (2016) 820-830.

  37. K Kajiwara, Y Matsui, TP Yadav, NK Mukhopadhyay, ON Srivastava, Quasicrystal as a Catalyst for the Synthesis of Carbon Nanotubes, Journal of Nanoscience and Nanotechnology 16 (2016) 3084-3089.

  38. M. Raviathul Basariya, N.K. Mukhopadhyay, Sriharsha Sripathi, K.A. Padmanabhan, “Grain size softening effect in intermetallics”, Journal of Alloys and Compounds673 (2016) 199-204.

  39. AK Chaubey, S Scudino, NK Mukhopadhyay, J Eckert, “Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles”, Journal of Materials Research, 31, (2016), 1229-1236.

  40.  M.R. Basariya, V.C. Srivastava, N.K. Mukhopadhyay, “Inverse Hall-Petch relationship in ball milled nanocrystalline Al5Fe2 intermetallic phase”, Phil. Mag. 96 (2016) 2445-2456.

  1. Ankur Khare, Shiva Sundar Yadava, K. D. Mandal, N. K. Mukhopadhyay, “Effect of Sintering Duration on the Dielectric Properties of 0.9BaTiO3 0.1CaCu3Ti4O12 Nanocomposite Synthesized by Solid State Route”, Microelctronic Engineering164 (2016) 1-6.

  2. Deepa Verma, Shobhit A. Pandey, Anushka Bansal, Shwetank Upadhyay, N.K. Mukhopadhyay, G.V.S. Sastry, and R. Manna, “Bulk Ultrafine-Grained Interstitial-Free Steel Processed by Equal-Channel Angular Pressing Followed by Flash Annealing”, Journal of Materials Engineering and Performance 25 (2016) 5157-5166.

  3. Ankur Khare, Shiva SundarYadava, Pooja Gautam, N.K. Mukhopadhyay, K.D. Mandal, “Dielectric studies of 0.5BaTiO3 - 0.5Bi2/3Cu3Ti4O12 nanocomposite”, Nanomaterials and Energy,(2016) 1-9.

  4. Anil Chaubey, Prashanth Konda, Gokuldoss, Zhi Wang, Sergio Scudino, Nilay Mukhopadhyay, Jürgen Eckert, “Effect of particle size on microstructure and mechanical properties of Al based composite reinforced with 10 vol.% mechanically alloyed Mg-7.4 Al particles”, Technologies(2016) 37-45.

  5. N. K. Prasad, K.M. Agrawal, J.R. Ranwa, S.S. Meena, S.M. Yusuf and N. K. Mukhopadhyay, “The effect of Mn on the structural and magnetic behaviour of Fe-6Si-8B alloy produced by high energy ball Milling” The Transactions of the Indian Institute of Metals70 (2017) 1431-1436.

  6. Deepa Verma, N.K. Mukhopadhyay, G. V. S. Sastry and R. Manna, “Microstructure and Mechanical Properties of Ultrafine-Grained Interstitial-Free Steel Processed by ECAP”, The Transactions of the Indian Institute of Metals (Springer), 70 (2017) 917-926.

  7. Raj Bahadur Singh, N.K. Mukhopadhyay, G. V. S. Sastry, and R. Manna, “Recovery of Ductility in Ultrafine-grained Low Carbon Steel Processed through ECAP followed by Cold Rolling and Flash Annealing", Metallurgical and Materials Transaction A48 (2017) 1189-1203.

  8. SS Mishra, Semanti Mukhopadhyay, TP Yadav, RM Yadav, Rebeca Romero-Aburto, R Vajtai, PM  Ajayan, NK Mukhopadhyay, ON Srivastava. Structural and magnetic properties of rapidly solidified Ni45Fe5Mn40Sn10 alloy ribbon, Journal of Advanced Physics 6,(2017) 389-396.

  9. SS Mishra, Semanti Mukhopadhyay, TP Yadav, RM Yadav, Sruthi Radhakrishnan, R Vajtai, PM Ajayan, NK Mukhopadhyay, HK Singh, ON Srivastava, Effect of Fe substitution by Co on off-stoichiometric Ni– Fe–Co–Mn–Sn Heusler alloy ribbons, Materials Research Express 4 (2017) 086507.

  10. Raj Bahadur Singh, N.K. Mukhopadhyay, G. V. S. Sastry, and R. Manna, “Development of High Strength Bulk Ultrafine-Grained Low Carbon Steel Produced by Equal-Channel Angular Pressing", Metallurgical and Materials Transaction A48 (2017) 5449-5466.

  1. A Khare, SS Yadava, P Gautam, NK Mukhopadhyay, KD Mandal, Effect of sintering on the dielectric properties 0.5 BaTiO3–0.5 Bi2/3Cu3Ti4O12 nanocomposite synthesized by solid state route, Journal of Materials Science: Materials in Electronics, 28 (2017), 5523-5530.

  2. T.P. Yadav, S.S. Mishra, N.K. Mukhopadhyay and O.N. Srivastava, “Leaching of rapidly quenched Al65Cu20Fe15 quasicrystalline ribbons”, Bull. Mater. Sci, 40 (2017) 1529-1533.

  3. T. P. Yadav, S. Mukhopadhyay, S. S. Mishra, N. K. Mukhopadhyay and O. N. Srivastava Synthesis of a single phase of high-entropy Laves intermetallics in the Ti–Zr–V–Cr–Ni equiatomic alloy, Phil. Mag Lett.97 (2017 )494-503.

  4. A Kumar, S Kumar, N.K. MukhopadhyaySynthesis and Characterization of SiCp Reinforced Magnesium Alloy Based Metal Matrix Composite Through Vacuum Assisted Stir Casting ProcessInternational Journal of Applied Engineering Research, 12 (2017) 16087-16093.

  5. Thakur Prasad Yadav, Cristiano F. Woellner, Shyam K. Sinha, Tiva Sharifi, Amey Apte, N. K. Mukhopadhyay, Onkar Nath Srivastava, Robert Vajtai, Douglas S. Galvao, Chandra Sekhar Tiwary, Pulickel Ajayan, “Liquid exfoliation of icosahedral quasicrystals”, Advanced Functional Materials28 (2018) 180118.

  6. Ankur Khare, Shiva Sundar Yadava, Pooja Gautam, Atendra Kumar, N. K. Mukhopadhyay, KD Mandal, “Dielectric properties of nanocomposite based on bismuth copper titanate” Journal of the Australian Ceramic Society, 54 (2018) 139-147.

  7. TP Yadav, N. K. Mukhopadhyay, “Quasicrystal: a low-frictional novel material”, Current opinion in chemical engineering”, 19 (2018) 163-169.

  8. A Kumar, S Kumar, N. K. Mukhopadhyay, “Introduction to magnesium alloy processing technology and development of low-cost stir casting process for magnesium alloy and its composites”, Journal of Magnesium and Alloys(2018) 245-254.

  9. V Shivam, J Basu, VK Pandey, Y Shadangi, N. K. Mukhopadhyay, “Alloying behaviour, thermal stability   and phase evolution in quinary AlCoCrFeNi high entropy alloy”, Advanced Powder Technology29 (2018) 2221-2230.

  10. V Shivam, J Basu, Y Shadangi, MK Singh, N. K. Mukhopadhyay, “Mechano-chemical synthesis, thermal stability and phase evolution in AlCoCrFeNiMn high entropy alloy”, Journal of Alloys and Compounds757 (2018) 87-97.

  11. M. Raviathul Basariya and N. K. Mukhopadhyay, “Structural and Mechanical Behaviour of Al-Fe Intermetallics” in “Intermetallic Compounds - Formation and Applications”, (Intech Open, London) (2018) 97-122.

  12. A Khare, A Kumar, S Jaiswar, N.K. Mukhopadhyay, K Mandal, “Dielectric studies of CCTO-based nanocomposite ceramic synthesized by a solid-state route”, International Journal of Materials Research109 (2018) 916-921.

  13. A Kumar, S Kumar, N.K. Mukhopadhyay, “Casting and characterization of TiC particulate reinforced AZ91 magnesium alloy metal matrix composite through stir casting process”, Int. J. Mech. Eng. Technol., 9 (2018) 856-863.

  14. RB Singh, N.K. Mukhopadhyay, GVS Sastry, R Manna, “Effect of Flash Annealing on Ultra-Fine Grained Low-Carbon Steel Processed Through Equal-Channel Angular Pressing Followed by Cryorolling”, Advanced High Strength Steel, (2018) 103-113.

  15. V Ramya, A Gangwar, SK Shaw, N.K. Mukhopadhyay, NK Prasad, Fe/Fe3O4 nanocomposite powders with giant high magnetization values by high energy ball millingBulletin of Materials Science, 42 (2019) 93-99.

  16. Y Shadangi, V Shivam, MK Singh, K Chattopadhyay, J Basu,N.K. MukhopadhyaySynthesis and characterization of Sn reinforced Al-Cu-Fe quasicrystalline matrix nanocomposite by mechanical millingJournal of Alloys and Compounds, 797 (2019) 1280-1287.

  17. V. Shivam, Y Shadangi, J Basu, NK MukhopadhyayAlloying behavior and thermal stability of mechanically alloyed nano AlCoCrFeNiTi high-entropy alloyJournal of Materials Research34 (2019) 787-795.

  18. RB Singh, D Verma, N.K. Mukhopadhyay, GVS Sastry, R Manna, Development of Texture in Ultrafine-Grained Low-Carbon Steel Processed through Equal-Channel Angular PressingJournal of Materials Engineering and Performance, (2019) 1-14 (https://doi.org/10.1007/s11665-019-04085-0).

  19. SS Mishra, S Mukhopadhyay, TP Yadav, N.K. Mukhopadhyay, O.N. Srivastava, “Synthesis and characterization of hexanary Ti–Zr–V–Cr–Ni–Fe high-entropy Laves phase”, Journal of Materials Research, 34 (2019) 807-818.

  20. V Shivam, Y Shadangi, J Basu, NK Mukhopadhyay, “Alloying behavior and thermal stability of mechanically alloyed nano AlCoCrFeNiTi high-entropy alloy—CORRIGENDUM, Journal of Materials Research, 35, (2020) 215-215.

  21. RB Singh, NK Mukhopadhyay, GVS Sastry, R Manna, “Development of single-phase bimodal microstructure in bulk ultrafine-grained low carbon steel”, (2020) Materials Today: Proceedings26 (2020) 1514-1519.

  22. VK Pandey, V Shivam, BN Sarma, NK Mukhopadhyay, “Phase evolution and thermal stability of mechanically alloyed CoCrCuFeNi high entropy alloy” Materials Research Express 6 (12), (2020) 1265b9.

  23. SS Mishra, TP Yadav, ON Srivastava, NK Mukhopadhyay, K Biswas, “Formation and stability of C14 type Laves phase in multi component high-entropy alloys” Journal of Alloys and Compounds, (2020)   153764.

  24. Yagnesh Shadangi, Sakshi Sharma, Vikas Shivam, Joysurya Basu, Kausik Chattopadhyay, Bhaskar Majumdar, NK Mukhopadhyay, “Fabrication of Al–Cu–Fe quasicrystal reinforced 6082 aluminium matrix nanocomposites through mechanical milling and spark plasma sintering” Journal of Alloys and Compounds, (2020) 154258.

  25. V Shivam, V Sanjana, NK Mukhopadhyay, “Phase Evolution and Thermal Stability of Mechanically Alloyed AlCrFeCoNiZn High-Entropy Alloy”, Transactions of the Indian Institute of Metals, (2020) 1-10.

  26. SS Mishra, TP Yadav, SP Singh, AK Singh, MA Shaz, NK Mukhopadhyay, “Evolution of porous structure on Al–Cu–Fe quasicrystalline alloy surface and its catalytic activities”, Journal of Alloys and Compounds834 (2020) 155162.

  27. Y Shadangi, V Shivam, S Varalakshmi, J Basu, K Chattopadhyay, N.K. Mukhopadhyay, “Mechanically driven structural transformation in Sn reinforced Al–Cu–Fe quasicrystalline matrix nanocomposite”, Journal of Alloys and Compounds834 (2020) 155065.

  28. H Jain, Y Shadangi, V Shivam, D Chakravarty, NK Mukhopadhyay, “Phase evolution and mechanical properties of non-equiatomic Fe–Mn–Ni–Cr–Al–Si–C high entropy steel”, Journal of Alloys and Compounds834 (2020) 155013.

  29. V Shivam, Y Shadangi, J Basu, NK Mukhopadhyay, “Evolution of phases, hardness and magnetic properties of AlCoCrFeNi high entropy alloy processed by mechanical alloying”, Journal of Alloys and Compounds832 (2020) 154826.

  30.  Nandini Singh, Y Shadangi, NK MukhopadhyayPhase Evolution and Thermal Stability of Low-Density MgAlSiCrFe High-Entropy Alloy Processed Through Mechanical AlloyingTransactions of the Indian Institute of Metals, 73 (2020) 2377-2386.

  31.  SS Mishra, TP Yadav, NK Mukhopadhyay, ON Srivastava, Synthesis of fine skeletal structure of Al-Co-Cu decagonal quasicrystals for hydrogen production through steam reforming of methanol, International Journal of Hydrogen Energy45 (2020) 24491-24501.

  32. Vikas Shivam, Debabrata Bhuyan, N.K. Mukhopadhyay and R. Manna, Microstructural Refinement and Mechanical Properties of Ferritic Stainless Steel Processed by Equal-Channel Angular Pressing, Journal of Materials Engineering and Performance, 29 (2020) 6818-6830.

  33. Anil Kumar, Santosh Kumar, N K Mukhopadhyay, Anshul Yadav, Jerzy Winczek, “Effect of SiC Reinforcement and its variation on Mechanical Characteristics of AZ91 Composites”, Materials, 13 (2020) 4913.

  34. Saptarshi MukherjeeShivank ShuklaChanchal GhoshN.K. Mukhopadhyay and Joysurya Basu Phase Stability and Microstructural Evolution in Vanadium-Titanium Alloys with Oxygen Dissolution and Varying Titanium-content, Microscopy and Microanalysis26 (2020) 2086-88.

  35. Thakur Prasad Yadav, Cristiano F Woellner, Tiva Sharifi, Shyam Kanta Sinha, Lu-Lu Qu, Amey Apte, NK Mukhopadhyay, ON Srivastava, Robert Vajtai, Douglas Soares Galvão, Chandra Sekhar Tiwary, Pulickel M Ajayan, Extraction of Two-Dimensional Aluminum Alloys from Decagonal QuasicrystalsACS Nano14 (2020) 7435-7443.

  36. Vivek Kumar Pandey, Yagnesh Shadangi, Vikas Shivam, Joysurya Basu, Kausik Chattopadhyay, Bhaskar Majumdar, B. N. Sarma, N. K. Mukhopadhyay, “Synthesis, Characterization and Thermal Stability of Nanocrystalline MgAlMnFeCu Low-Density High-Entropy Alloy”, Transactions of the Indian Institute of Metals, 74 (2021) 33-44.

  37. Vikas Shivam, Joysurya Basu, R. Manna and N.K Mukhopadhyay, Local Composition Migration Induced Microstructural Evolution and Mechanical Properties of Non-Equiatomic Fe40Cr25Ni15 Al15CoMedium-Entropy Alloy, Metallurgical and Materials Transactions A52 (2021) 1777-1789.

  38. SS Mishra, TP Yadav, RM Yadav, Liangzi Puthirath, Anand B., Liangzi Deng, Moein Adnani, Ching-Wu Chu, Robert Vajtai, PM Ajayan, Krishanu Biswas, N.K. Mukhopadhyay, ON Srivastava “Effect of Ga substitution on structural and magnetic properties of Fe50Mn25Al25-xGax Heusler alloys”, Journal of Alloys and Compounds, 854 (2021) 156756.

  39. Anil Kumar, Santosh Kumar, N K Mukhopadhyay, Anshul Yadav, Virendra Kumar, Jerzy Winczek, “Effect of variation of SiC Reinforcement on wear behaviour of AZ91 Alloy Composites”, Materials, 14 (2021) 990.

  40. Nandini Singh, Yagnesh Shadangi, G Suryaprakash Goud, Vivek Kumar Pandey, Vikas Shivam, N.K. Mukhopadhyay, “Fabrication of MgAlSiCrFe low-density high-entropy alloy by mechanical alloying and spark plasma sintering, Transactions of the Indian Institute of Metals74 (2021) 2203-2219.

  41. Nandini Singh, Yagnesh Shadangi, Vikas Shivam, N.K. Mukhopadhyay, “MgAlSiCrFeNi low density high entropy alloy processed by mechanical alloying and spark plasma sintering: Effect of phase evolution and thermal stability”, Journal of Alloys and Compounds875 (2021) 159923.

  42. Trishita Roy, Vikas Shivam, Kausik Chattopadhyay, R. Manna and N.K. Mukhopadhyay, “Microstructural evolution and mechanical properties of nano yttria dispersed 316L austenitic stainless steel by mechanical alloying and sintering”, Transaction of the Indian Institute of Metals (on-line available, 2021) 1-12.

  43. R Rawat, A Tiwari, N Arun, SVS Nageswara Rao, AP Pathak, Yagnesh Shadangi, NK Mukhopadhyay, S Venugopal Rao, A Tripathi, “Nanosecond pulsed laser ablation of Al–Cu–Fe quasicrystalline material: Effects of solvent and fluence”, Journal of Alloys and Compounds, 859 (2021) 157871.

  44. NK Mukhopadhyay, "Structural Stability and Mechanical Behavior Quasicrystals and Other Complex Metallic Alloys", IIM Metal News, 24 (2021) 15-29. (G D Birla Memorial Lecture - IIM NMD 2016)

  45. Vivek Kumar Pandey, Yagnesh Shadangi, Vikas Shivam, B.N. Sarma and N.K. Mukhopadhyay, “Theoretical and Experimental study on phase stability of TiVZrMoW refractory high entropy alloy”, Philosophical Magazine, 102 (6) (2022) 480-503.

  46. Shashank Shekhar Mishra, Thakur Prasad Yadav, N. K. Mukhopadhyay, Journal of Non-Crystalline Solids, Phase stability and Phase transformations in Al-Pd-Mn Quasicrystalline alloys with low-Ga content, Journal of Non-Crystalline Solids576 (2022) 121285.

  47. T.P. Yadav, Harshit Agarwal, M.A. Shaz, N.K. Mukhopadhyay, “Synthesis and stability of higher order superstructure of cubic Laves phase in Al-Cu-Ta alloy”, Transactions of the Indian Institute of Metals, 75 (5) (2022) 1153-1162.

  48. N.K. Mukhopadhyay and Thakur Prasad Yadav, “Quasicrystals: Structurally Complex Intermetallics”, Journal of the Indian Institute of Science, 102 (2022) 59-90.

  49. Thakur Prasad Yadav, Abhishek Kumar, Satish Kumar Verma and N.K. Mukhopadhyay, “High-Entropy Alloys for Solid Hydrogen Storage: Potentials and Prospects, Transactions of the Indian National Academy of Engineering, 7 (2022) 147-156. 

  50. Thakur Prasad Yadav, Partha Kumbhakar, N. K. Mukhopadhyay, Douglas S. Galvo, P. M. Ajayan, S. Ranganathan, K. Chattopadhyay, Chandra Sekhar Tiwary, “Revisit of Quasicrystals for Synthesis of 2D metals”, Transactions of the Indian Institute of Metals, 75 (2022) 1093-1100 (INVITED ARTICLE).

  51. Anshul Yadav, Anil Kumar, Santosh Kumar, N. K. Mukhopadhyay, Devendra Kumar Sinha, Effect of TiC particulate reinforcement on wear and mechanical properties of Magnesium alloy (AZ91) composites", International Journal of Metalcasting, (2022) 1-10.

  52. S. S. Mishra, Anurag Bajpai, Thakur Prasad Yadav, Ram Manohar Yadav, Anand B. Puthirath, Liangzi Deng, MoeinAdnani, Ching-Wu Chu, Robert Vajtai, Pulickel M Ajayan, Krishanu Biswas, and   N. K. Mukhopadhyay, An Experimental and Theoretical Investigation on Structure-Property Correlation of Cu2Mn1Al1-xGax Full-Heusler Alloy, Journal of Alloys and Compounds895 (2021) 162865.

  53. S. Koul, V. Shivam, K. Chattopadhyay, R. Manna, K. Biswas and N.K. Mukhopadhyay, “Development of oxide dispersed austenitic stainless steel though mechanical alloying and spark plasma sintering”, Journal of Engineering Materials and Performance, (2022).

  54. Abhishek Kumar, Thakur Prasad Yadav and N.K. Mukhopadhyay, Notable hydrogen storage in Ti-V-Cr-Ni-Zr High Entropy Alloy, International Journal of Hydrogen Energy , 47 (54) (2022) 22893-22900.

  55. Yagnesh Shadangi, Vikas Shivam, K. Chattopadhyay and N.K. Mukhopadhyay, Powder Metallurgical Processing of Sn-Reinforced Al-Cu-Fe Quasicrystals: Structure, Microstructure and Toughening Behavior, Journal of Manufacturing and Materials Processing, 6(3) (2022) 60-76. (Invited Article)

  56. Vikas Shivam, Vadapalli Sanjana, Yagnesh Shadangi, V C Srivastava, NK Mukhopadhyay, Synthesis of nanostructured equiatomic TiCrFeCoNi high-entropy alloys by mechanical alloying and conventional sintering, Transactions of Powder Metallurgy Association of India, 47 (2022) 51-57. 

  57. Harsh Jain, Y Shadangi, D Chakravarty, A.K. Dubey and N.K. Mukhopadhyay; High Entropy Steel Processed through Mechanical Alloying and Spark Plasma Sintering: Alloying Behaviour, Thermal Stability, and Mechanical Properties, Materials Science and Engineering A, 856 (2022) 144029.

  58. H Jain, Y Shadangi, D Chakravarty, AK Dubey, NK Mukhopadhyay, “Erratum to “High entropy steel processed through mechanical alloying and spark plasma sintering: Alloying behavior, thermal stability, and mechanical properties” Materials Science and Engineering A, 858, (2022)144166.

  59. Rajesh Rawat, Bibek Kumar Singh, Archana Tiwari, N. Arun, S. V. S. Nageswara Rao, A. P. Pathak, Yagnesh Shadangi, N. K. Mukhopadhyay, Srinivasa Rao Nelamarri, S. Venugopal Rao, A. Tripathi; Formation of CuNi Enriched Phases During Laser Processing of Non-Equiatomic AlSiCrMnFeNiCu High Entropy Alloy Nanoparticles, Journal of Alloys and Compounds, (2022) 166905. 
  60. Yagnesh Shadangi, K. Chattopadhyay and N.K. Mukhopadhyay, Powder metallurgical processing of Al matrix composites reinforced with AlSiCrMnFeNiCu high entropy alloys: Microstructure, thermal stability and microhardness, Journal of Materials Research (2023) 1-17

  61. Priyatosh Pradhan, Y Shadangi, V Shivam and N.K. Mukhopadhyay,  Powder Metallurgical Processing of CrMnFeCoMo High Entropy Alloy: Phase evolution, Microstructure, Thermal Stability and Mechanical Properties, Journal of Alloys and Compounds, 935 (2023)  168002.

  62. Namrata Mazumder, Dipanjan Kumar, Mahendra Pratap Singh, Surendra Kumar Makineni, Nilay Krishna Mukhopadhyay, Kamanio Chattopadhyay; Synergistic effect of multimodal γ' precipitates tuned through Ti addition on phase stability and strength of Co-Ni based superalloy; Scripta Materialia, 223 (2023), 115105.


  63. Vikas Shivam, Shubhada Kar, Gaurav K. Bansal, Avanish K. Chandan, Biraj K. Sahoo, G.K. Mandal, N.K. Mukhopadhyay, V.C. Srivastava; A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties; Journal of Alloys and Compounds (2023)170029 (accepted)


  64. Harsh Jain, Y Shadangi, D Chakravarty, K. Chattopadhyay, A.K. Dubey, and N.K. Mukhopadhyay; Low-density Fe40Mn19Ni15Al15Si10C1 High Entropy Steel Processed by Mechanical Alloying and Spark Plasma Sintering: Phase Evolution, Microstructure, and Mechanical properties; Materials Science & Engineering A 868 (2023) 144776.


  65. Abhishek Kumar, Thakur Prasad Yadav, and N.K. Mukhopadhyay; Hydrogen storage performance of C14 type Ti0.24V0.17Zr0.17Mn0.17Co0.17Fe0.08 high entropy alloy; Transactions of INAE (2023) (accepted).


  66. Rajat Gupta, Y Shadangi, K. Chattopadhyay, A.K. Chaubey, and N.K. Mukhopadhyay; CNT reinforced 6082 Al matrix nanocomposites: Influence of mechanical milling and cryomilling, Advances in Materials & Processing Technology (Review submitted, 2023).


  67. Vikas Shivam, Dishant Beniwal, Yagnesh Shadangi, Prashant Singh, V.S. Hariharan, G. Phanikumar, Duane D. Johnson, Pratik K. Ray, and N.K Mukhopadhyay; Effect of Zn addition on phase selection in AlCrFeCoNiZn high-entropy alloy; Acta Materialia (Under review, 2023).


  68. Rithik Roshan Tripathy, Yagnesh Shadangi, B. Mukherjee, N. K. Mukhopadhyay; Microstructure and electrochemical analysis of the light-weight AlSiCrFeMnNiCu high entropy alloy in the different corrosive medium; Journal of Alloys and Compounds (Under review, 2023).


  69. Yagnesh Shadangi, S Bhatt, P Pradhan, A Tiwari, A Tripathy, K Chattopadhyay, and N K Mukhopadhyay; Structure, electrical and thermal transport properties of Sn containing Al-Cu-Fe quasicrystals prepared by mechanical milling subsequent annealing; Journal of Alloys and Compounds (Accepted, 2023). 


  70. Bibek Kumar Singh, Dipanjan Banerjee, A. Mangababu, Yagnesh Shadangi, N. K. Mukhopadhyay, Rajesh Rawat, A. P. Pathak, S. Venugopal Rao, Archana Tiwari, Ajay Tripathy; Ultra-short Pulsed Laser Ablation of Decagonal AlCoNi and AlCoCuNi Quasicrystals; Journal of Alloys and Compounds (Under review, 2023). 


  71. Satish K. Verma, S. S. Mishra, N.K. Mukhopadhyay, T. P. Yadav, “Superior catalytic action of high-entropy alloy on hydrogen sorption properties of MgH2”, International Journal of Hydrogen Energy, (review submitted, 2023).


  72. Abhishek Kumar, Nilay Krishna Mukhopadhyay, and Thakur Prasad Yadav, “Hydrogen storage in high entropy alloys”, in Book (chapter 3.2), Towards Hydrogen Infrastructure: Advances and Challenges in Preparing for the Hydrogen Economy, (2023) (pp.1-30) (Elsevier) DOI: https://doi.org/10.1016/B978-0-323-95553-9.00007-8.


  73. Abhishek Kumar, Thakur Prasad Yadav, Mohammad Abu Shaz, and Nilay Krishna Mukhopadhyay, “Phase transformation on substitution of Mn with Zr in TiVCoNiZrMn High Entropy Alloys”, High Entropy Alloys and Materials, (2023, under review). 


     

 

Conference Reporting, Book Chapter & Technical Articles (19)

  1. N.K. Mukhopadhyay and Arvind Sinha, "Quasicrystals", Current Science, 73, (1997) 558.
  2. A.K. Pramanick and N.K. Mukhopadhyay, “Aperiodic-2000”, Current Science,79 (2000) 1637.
  3. N.K. Mukhopadhyay, “Quasicrystals-2001”, Current Science, 82, (2002) 251.
  4. N.K. Mukhopadhyay, “Quasicrystals: A New Intermetallic Compound”, Ann. Symp., IIT- Kharagpur, 2003, p.30.
  5. N.K. Mukhopadhyay, “Rapidly quenched and metastable materials”, Current Science, 89 (2005) 1655.
  6. N.K. Mukhopadhyay, “Bulk Metallic Glasses: Science and Technology”, Current Science, 92 (2007) 1035-1037.
  7. V. Ande, D. Mukherjee and N.K. Mukhopadhyay, “Materials in Sports Equipment”, IIM Metal News,10 (2007) 6-11.
  8. N.K. Mukhopadhyay, “INCOME 2008”, Current Science, 96 (2009) 881-882.
  9. N.K. Mukhopadhyay, Book reviews on ‘la vintage metallurgie: 60 Years of Marriage of Science to Industry”, Current Science, 103 (2012) 92-93.
  10. N.K. Mukhopadhyay, Aperiodic 2012, Current Science, 103 (2012) 1392-94.
  11. N.K. Mukhopadhyay, ‘Electron Microscopy: CWEM-2012’, Current Science, 104 (2013) 692- 694.
  12. N.K. Mukhopadhyay, ‘The Tenth Ewald Prize and aperiodic Crystals’, Current Science, 106 (2014) 793.
  13. N.K. Mukhopadhyay, High Entropy Alloys: Renaissance in Physical Metallurgy, Current Science109 (2015) 665-667.
  14. N.K. Mukhopadhyay, Metals and Materials Research, Current Science, 111 (2016) 969-71.
  15. N.K. Mukhopadhyay, Electron Microscopy, Current Science, 112 (2017) 17-19.
  16. Krishanu Biswas and N.K. Mukhopadhyay, High Entropy Materials, Current Science, 114 (2018) 254-256.
  17. N.K. Mukhopadhyay, Kavli Prize in Nanoscience, Indian Institute of Metal (IIM) Journal, ‘Metal News’, 23 (2020). 
  18. NK Mukhopadhyay, "Structural Stability and Mechanical Behavior Quasicrystals and Other Complex Metallic Alloys", IIM Metal News, 24 (2021) 15-29. (G D Birla Memorial Lecture - IIM NMD 2016)
  19. Abhishek Kumar, Nilay Krishna Mukhopadhyay, and Thakur Prasad Yadav, “Hydrogen storage in high entropy alloys”, in Book (chapter 3.2), Towards Hydrogen Infrastructure: Advances and Challenges in Preparing for the Hydrogen Economy, (2023) (pp.1-30) (Elsevier) DOI: https://doi.org/10.1016/B978-0-323-95553-9.00007-8.

(i)  Ph.D. students guided (Both completed and ongoing):
 
Completed (13):

  1. Rampada Manna (2008): “Design and characterization of ultra-fine grained aluminium and aluminium alloys processed by equal channel angular pressing” (with Prof. G.V.S. Sastry).

  2. C. Sasikumar (2008): “The effect of mechanical activation on energetics and dissolution kinetics of Indian beach sand ilmentite”, (with Dr. S. Srikanth, External supervisor, CSIR-NML, Jamshedpur).

  3. T.P. Yadav (2009): ‘Studies on the formation and phase stability of some Al based (Al-Cu-Fe, Al-Ni-Fe, Al-Co-Ni, Al (Ga)-Pd-Mn) quasicrystals and related nano phases” (with Prof. O.N. Srivastava and Prof. R.S. Tiwary, Dept. of Physics, BHU).

  4. Anil Kumar Chaubey (2013): “Development of high strength Mg-Al alloys and Al-based composites”, (with Dr. B.K. Mishra, Ext. supervisor, CSIR-IMMT, Bhubaneswar).

  5. Dibyendu Mukherjee (2013): “Synthesis and characterization of nanostructured complex metallic alloys by non-equilibrium processing”.

  6. M. Raviathul Basariya (2015): “Synthesis and characterization of Al-based nanocrystalline and nanocomposite alloys”, (with Dr. S. Srikanth, External supervisor, CSIR-NML, Jamshedpur).

  7. Raj Bahadur Singh (2017): “Development of bulk ultrafine steel of high strength and high ductility through severe plastic deformation” (with Dr. R. Manna).

  8. Ankur Khare (2018): “Studies on electrical and dielectric properties of xBaTiO3- (1-x) ACu3Ti4O12(A=Bi2/3, Ca) composites (in the dept. of Chemistry, IIT (BHU) with Prof. K.D Mandal).

  9. Anil Kumar, (2019): “Casting and Characterization of Mg- alloy based metal matrix composites”, (in the Dept. of Mech. Engg., with Prof. Santosh Kumar).

  10. Vikas Shivam (2019): “Phase evolution and thermal stability of mechanically alloyed and cast AlCoCrFeNi high entropy alloys

  11. Yagnesh Shadangi (2020): "Studies on Al-Cu-Fe quasicrystalline and 6082 Al-alloy based metal matrix composites" (joint supervision: Dr. K Chattopadhyay, Dept. of Met. Engg., IIT (BHU), Varanasi)

  12. Vivek Kumar Pandey (2021): "Synthesis and phase stability study of some equiatomic high entropy alloys" (joint supervision: Prof. B. N. Sarma, Dept. of Met. Engg., IIT (BHU), Varanasi)

  13. Nandini Singh (2021): "Phase evolution, thermal stability and mechanical properties of some low-density high entropy alloys

  On-going (07):

14. Saptarshi Mukherjee: “Omega phase in V-based alloys” (joint supervision: Dr. J Basu, Dept. of Met. Engg., IIT (BHU), Varanasi)


15. Harsh Jain: "High entropy materials for high temperature applications" (joint supervision: Dr. A. K. Dubey, Dept. of Ceramic Engg., IIT (BHU))  


16. Priyatosh Pradhan: "Phase stability, thermal stability and mechanical properties of some refractory based complex concentrated alloys"


17. Rajat Gupta: "Fabrication of Al-CNT-Yitrria functionally graded composites" (joint supervision: Dr. K Chattopadhyay, Dept. of Met. Engg., IIT (BHU))


18. Ritik Roshan Tripathy: "Non-equiatomic high entropy intermetallics and their reinforcement in Al matrix composites"


19. Abhishek Kumar: "Structure and microstructure of heusler and other related alloys" (joint supervision: Dr. T. P. Yadav, Dept. of Physics, BHU, Varanasi)


20. Marshal Hembram"Design and development of precipitation strengthened high entropy steels"


 

(ii) M.Tech Student guided (Completed and ongoing):

Completed: 47

  1. Shantosh Kumar Sahu, (2001), “Synthesis and characterization of Al65Cu20Fe15 quasicryalline particulate composite”, 

  2. Kurup Vinod V.G.K., (2002) “High energy ball milling of Al65Cu20Fe15 quasicrystalline alloy”

  3. G. Sreenivasulu, (2002), “Effect of alloying and ageing on morphological changes from lamellar to equiaxed microstructure of α2+y titanium aluminides”

  4. Jatin Bhatt, (2003), “Synthesis and characterization of nanocrystalline/quasicrystalline Mg32(ALZn)49 phase by non-equilibrium processing techniques”

  5. Dibyendu Mukherjee, (2005), “Synthesis and characterization of nano γ –brass alloys”

  6. Sudarsan Dutta, (2006), “Synthesis and characterization of Al-Cu-Fe, Al-Cr-Cu and Al-Cr-Fe γ -brass nanophase materials by non –equilibrium processing techniques”.

  7. Venkat Ande, (2007), “Synthesis and characterization of nanocrystalline /amorphous Al –Mg alloys”.

  8. K Thirupathi, (2009), “Mechanical milling behavior of Aluminum –transition metal alloys”

  9. Nikhil Khunteta, (2010), “Synthesis of high entropy alloys using mechanical alloying”.

  10. Vihan Gupta, (2010), “Synthesis and characterization of al matrix composite with hybrid reinforcement of Al2Oand Al3Fe”.

  11. Prasad Dharmireddy, (2010), “Synthesis and characterization of Fe-Si-B base nanocrystalline magnetic materials by ball milling”).

  12. Shantosh Kumar Alla, (2012), “Synthesis and characterization of high entropy alloys by high energy ball milling”.

  13. Saurabh Singh, (2013), “Characteristic nature of indentation in Zr50Cu40Al10 bulk metallic glass”.

  14. Vikas Shivam, (2013), “Development of ultrafine –grained ferritic stainless steel”.

  15. Nandini Singh (2013), “Synthesis and characterization of high entropy alloys by Mechanical alloying”.

  16. Shah Jay Bhadresh, (2013), “Mechanical Alloying of hyper-eutectic Al-Si Alloys”

  17. Ashwini Kumar, (2014), “Studies on Indentation behavior of Zr50Cu40Al10 metallic glass and molecular dynamics simulation of nanoindentation in metals”

  18. Ram Mohan, (2014), “Synthesis of Al-based quasicrystal composites”

  19. Akhilesh Pandey, (2014), “Micro and nanoindentation of intermetallics”

  20. Arvind Rana, (2014), “Mechanical Alloying of ternary Al-Si based alloys”

  21. Syed Ashar Afroz, (2014), “Studies on HCP based High Entropy Alloys”

  22. Kamal Singh, (2014), “Development of ultrafine grained structure in 409M ferritic stainless steel”.

  23. Kapil Kumar, (2014), “Synthesis and characterization of Al-Si based alloys for piston applications”.

  24. Nitish Chitansshi (2015), “Studies on High entropy alloys”

  25. Harshit Agarwal (2015): “Indentation characteristics of advanced materials”

  26. Trishita Roy (2015): “Microstructure and Mechanical properties of oxide dispersion strengthened (nano Y2O3) austentitic steel synthesized by mechanical alloying” (with Dr. Kausik Chattopadhyay)”.

  27. Sarvesh Mundra (2016): Study of the surfaces treated by SMAT technique

  28. Supriya Kaul (2016); Investigation on oxide dispersions in austenitic stainless steel.

  29. Richa Tripathi (2016-17): “Mechanical Alloying/Milling of Complex Metallic Alloys” (with Dr. K. Chattopadhyay)

  30. Saptarshi Mukherjee (2016-17): “Synthesis and Characterization of Y2O3 dispersed Fe based    Alloys” (with Dr. K. Chattopadhyay)

  31. Yeleti Fredrick Nobel (2016-17): “Synthesis of composite with Al-Fe-Cu quasicrystal as reinforcement in Al6082 alloy matrix”.

  32. Rajat Arora (2016-17): “Synthesis of nanocrystalline magnetic alloys” (with Dr. N.K. Prasad).

  33. Visharad Jalan (2017-18): “Synthesis and characterization of Al Co Cr Fe Ni Ti High Entropy Alloys”.

  34. Akshay Srivastav (2017-18): Transition metal based photo/electrochemical hydrogen (H2) production (with Dr. B. Mukherjee).

  35. V. Sanjana (2017-18): “Synthesis, Characterization and Thermodynamics of High Entropy Alloys”

  36. Rachit Agarwal (2017-2018): “Mechanical behaviour and characterization of Mg2Si reinforced magnesium metal matrix composite”, (with Prof. I. Chakrabarty).

  37. Ganne Ketan Balaji:(2014-2019): “Synthesis and characterization of Al based Nanocrystalline alloys and Nonocomposites”

  38. Priyatosh Pradhan (2018-2019): “Synthesis and Characterization of Equi-Atomic Cr-Mr-Fe-Co-Mo High Entropy Alloy by Mechanical Alloying”

  39. Sai Pavan S.N. (2015-2019): “Study of structural, mechanical and wear properties of Al 6082 matrix-AlCuFe quaicrystal reinforcement composite”

  40. Vivek Vikash (2015-2020): “Synthesis & Characterization of HEA reinforced Al Based nano-crystalline composite”

  41. Namrata Majumdar (2019-20): “Effect of Ti addition on microstructural stability and mechanical properties of Co-Ni-Nb-Al-Ti Superalloy systems.”

  42. Varalakshmi Somarouthu (2019-20): “Synthesis and characterization of novel compositionally complex materials”

  43. Sakshi Sharma (2020-21): "Fabrication of Al-Cu-Fe quasicrystal reinforced Aluminum matrix composite"

  44. G Suryaprakash Goud (2020-21): "Synthesis and characterization of Carbon Nano-tubes reinforced Al-based quasicrystal composites"

  45. Kalla Sai Kiran (2020-21): "An investigation on the content of Iron on the stability of high entropy cantor alloy"

  46. Athili Santosh Kumar (2021-22): "Structure, Microstructure and Microhardness of TixVCrMnFeNiCo (x=0, 05., 1.0) HEAs"

  47. Shivam (2021-22): "Powder metallurgical processing of Al-Cu-Fe quasicrystals reinforced Al matrix composites"

    On-going: 03

  48. Tanishq Bohare (2021-23): "Experimental and machine learning approaches for establishing phases in HEAs"


  49. Maloth Devilal (2022-24): "Alloying behavior and phase evolution in MgAlSiCrFeNi low-density HEAs"


  50. Harsh Singh (2022-24): "Experimental and ML-based approach for phase evolution and mechanical properties of some HEAs"