Research Grants/ Projects
| Duration | Project Title | Sponsoring Agency | Principal Investigator |
|---|---|---|---|
| 2021-2023 | Localized Electricity Generation through Modular Low Temperature ORC Units | CPRI Bangalore | Prof. S. K. Shukla |
| 2021-2023 | Development of advanced nanocrystalline coatings and LASER cladding system for repair work related to HEMMs and other structural components | NCL, Singrauli | Dr. Meghanshu Vashista |
| 2019-2022 | Photonic radiative cooler for passive sub-ambient cooling | IMPRINT, SERB, New Delhi | Dr. J. Sarkar |
| 2020-2023 | Development of ORC technology for waste heat utilization for the generation of electricity | BRNS, Mumbai | Dr. J. Sarkar |
| 2021-2023 | Development of Friction Stir Welding for repair work of high-temperature materials like EN-24 steel | NCL, Singrauli | Dr. Mohd Zaheer Khan Yusufzai |
| 2019-2022 | Development of Ti-alloy-based composites by mechanical alloying and stirrer casting route for dental applications | SERB, (DST) India | Prof. R. K. Gautam |
| 1 year | Technology Intervention for creative economy | Mindshare | Dr. Lakshay |
| 2021- 2023 | Development of Optical Fibre Cable Colouring Machine | DST, New Delhi | Dr. Debashis Khan |
| 3 years | 3D Computational and Experimental Study on Layer Dynamics and Prediction of Critical Power Law Scales in Double-Diffusive Finger Convection | SERB (DST) India | Dr. O. P. Singh |
| 2022-2025 | Manufacturing of Complex Titanium Assembly Part for Missiles using Fabrication, Simulation, Testing & Prototyping studies | DRDL Hyderabad | Prof. Santosh Kumar |
| 01/01/2020-31/12/2022 | Assessment of Structural Vulnerability through Characterisation of Tornado for a NPP Site | BRNS, Mumbai | Dr. Arnab Sarkar |
| 01/04/2020-31/03/2023 | Pathology on a Spinning Disc | MHRD | Dr. Arnab Sarkar |
| 01/04/2020-31/03/2022 | Assessment of Vulnerability of Structures in Regard to Cyclonic Wind Loads | BIS | Dr. Arnab Sarkar |
| 2 years | Prediction of Dose-Volume Histograms of Organs-at-Risk in Prostate Cancer Radiation Therapy using Machine Learning | I-DAPT-HUB Foundation, IIT (BHU), Varanasi | Dr. Arnab Sarkar |
| 3 years | Development of a Multiplex Portable Spinning Disc for Effective Monitoring of Women’s Health during Different Stages of Pregnancy | DST | Dr. Arnab Sarkar |
| March 2022-February 2024 | Development of Connected Vehicle Technology for an Urban concept Autonomous Vehicle. | IDAPT Hub Foundation | Dr. Amitesh Kumar |
| 2020-2022 | Impact of a micro-spray on bio mimicking substrate | SERB, INDIA | Dr. Binita Pathak |
| January 2022 to January 2024 | Reactivity Controlled Compression Ignition (RCCI) Combustion Engine for Methanol Utilization and Its Feasibility Analysis to be Adopted in Hybrid Electric Vehicles (HEVs) | SERB | Dr. Akhilendra Pratap Singh |
| 2019-2020 | Development Of Complex Aluminum Shell Part Using High Pressure Die Casting | DRDL HYDERABAD | Prof. Santosh Kumar |
| 2018-2021 | Experimental study of turbulent jet | IIT(BHU), Seed Grant | Dr. Amitesh Kumar |
| 2018-2021 | Effective necrosis of skin tumour using cryospray | IIT(BHU), DIC | Dr. Amitesh Kumar |
| 2020-20222 | Jet in Crossflow | DST (SERB) | Dr. Anubhav Sinha |
| 2019-2020 | Design Small Scale Portable Biogas Digester For Electric Generation For Rural Area In Developing Country | Research Grant of International Collaboration, Udayana University, Indonesia | Prof. S.K.Shukla, |
| 2019-2020 | Valorisation of agri-waste for sustainable recovery of energy and nutrient for climate change impact reduction by biorenewables leading to sustainable farming | GCRF, Govt. of UK | Prof. S.K.Shukla, |
| 2018-2020 | Development of an intelligent evaporative cooler for composite climate | DST, New Delhi | Dr. Jahar Sarkar |
| June, 2019 onwards | Behaviour of partially miscible fluid in microgravity | United Nation Office for Outer Space Affairs | Prof. Pradyumna Ghosh |
| 2020-2022 (2.5 years) | CARS project on design and analysis of linear induction motor drive for EMLS | DRDO | Dr. O. P. Singh R. K. Srivastava, Somak Bhattacharyya |
| 2015-19 | Technology Development and fabrication of Tabletop CNC Machine for Micro-tube hydro forming with process optimization | BRNS, Mumbai | Prof. Santosh Kumar |
| March, 2017- December, 2019 | Characterisation and validation of Schilieren technique for capturing shock wave | DRDO | Dr. Amitesh Kumar |
| Feb 2019 | Establishing the preliminary systems/facilities that are required for initiating research activities | IIT(BHU), Seed Grant | Dr. Laltu Chandra |
| 2016-2019 | Investigation of double diffusive finger convection | IIT (BHU) (seed grant) | Dr. O. P. Singh |
| May 2018 – May 2020 | Waste heat recovery systems in automobiles using TEG and PCM | DIC | Dr. R. R. Sahoo |
| July, 2018 onwards | Use of flow visualization and thermographic tools for thermal and biomedical applications | R&D Lab Grant, IIT(BHU) | Prof. P. Shukla |
| 2018-20 | Wind Simulation for Fatigue Failure Analysis and Design Wind Load Specification for High-rise Buildings and Slender Structures in India | Individual Faculty Grant, IIT (BHU) | Dr. Arnab Sarkar |
| 2016-17 | Design and Development of portable green solar cooker | Project Varanasi | Prof. Santosh Kumar |
| 2016-17 | Fabrication of a Machine for 3D printing filament production & Show casing of 3D printing Technology | DIC, IIT(BHU) | Prof. Santosh Kumar |
| 2015-17 | Design Development of an Incremental Sheet Hydro forming Machine Setup | DST | Prof. Santosh Kumar |
| 2015-17 | Technology Development and fabrication of Tabletop Tube hydro forming Machine | BRNS Mumbai | Prof. Santosh Kumar |
| 2016-18 | Development of Rubber based Sheet hydro forming Setup | DRDL Hyderabad | Prof. Santosh Kumar |
| 2016-18 | Setting of ‘Teaching Learning Centre (Technical)' under PMMMNMTT scheme | MHRD | Prof. Santosh Kumar |
| 2018-2019 | Additive Manufacturing of Functional Assembly | Institute Research project (individual faculty) | Prof. Santosh Kumar |
| 2008-2009 | Design and Development of Commercial Solar Dryer for Aonla Drying | AICTE , New Delhi | Prof. S. K. Shukla |
| 2011-2012 | Development of Improved Wood Cook Stoves for Rural Areas and Some Quantifications of Carbon Savings | U.G.C., New Delhi | Prof. S. K. Shukla |
| 2013-2016 | Development and Dissemination of Low Carbon Technologies in Rural and Urban Areas | Council of Science and Technology, (CST, UP) | Prof. S. K. Shukla |
| 2014-2018 | Centre for Excellence on Energy and Resources Development | MHRD, Govt. of India | Prof. S. K. Shukla |
| 2017 onwards | Technology Development Centre (Incubation) for Grass root Innovators | Council of Science and Technology, (CST, UP) | Prof. S. K. Shukla |
| 2017-2019 | Design and Development of Cooling and Power Generation Systems | Council of Science and Technology, (CST, UP) | Prof. S. K. Shukla |
| 2014-March,18 | Quenching behaviour of dry heated rod in Nanofluids | BRNS, DAE | Prof. Pradyumna Ghosh |
| October 2014- Dec 2017 | Design of high temperature facility for graphite dust formation and transport | BRNS | Prof. P.Shukla Prof.R.S.Singh, Chemical Engineering, IIT(BHU) |
| 2014-2017 | Assessment of residual stress upon friction stir welding of steel | DST, India | Mohd Zaheer Khan Yusufzai |
| 2016-2018 | Heat Transfer and Flow Characteristics of Hybrid Nanofluids in Mini-Micro-channels | IIT (BHU) | Dr. Jahar Sarkar |
| 2017-2018 | Development of Eco-friendly Heat Pump Dryer for Bio Applications | DIC, IIT(BHU) & BHU | Dr. Jahar Sarkar |
| 2 years | Study on Wind Climatology on Slender Structures Using Weibull and Generalized Extreme Value Distribution | BRNS, Department of Atomic Energy, Govt. of India | PI: Dr. Arnab Sarkar Co PI: Dr. S. K. Panda |
| 2 years | Harvesting of Renewable Energy through Gasification of Biomass | CERD, IIT (BHU), Varanasi | PI: Dr. Arnab Sarkar Co PI: Dr. J.P. Chakraborty |
| 1 year | Identification of Pollution levels on the streets of Varanasi and developing a traffic routing model for an environment optimized traffic flow strategies | IRP, IIT (BHU) | Dr.Cherian Samuel |
| 2013-2016 | Effective tumour necrosis using cryosurgery | DST | Dr Amitesh Kumar |
| 2015-2016 | Design of a cryogenic helium turboexpander | BRFST-NFP | Dr Amitesh Kumar |
| 2017 onwards | Performance analysis of articulated concrete blocks using CFD | Floodkon Consultants LLP | Dr. O. P. Singh |