Dr. Manas Ranjan Majhi

Associate Professor
Department/School/Unit Name
Department Of ceramic Engineering IITBHU
Phone No(s): 05427165147
Email: mrmajhi.cer@iitbhu.ac.in
Area of Interest: Refractory Technology, Bio glass Ceramics, Composite Material ,Waste Management & Industrial Ceramics

B.Tech. Ceramic Engineering; NIT- Rourkela, 2001

M.Tech. Ceramic Engineering, IIT(BHU) Varanasi , 2006

Ph.D, Ceramic Engineering , IIT(BHU) Varanasi , 2012

53.Vaibhav Pandey,Ashutosh Gupta ,A.Raj, G Sora,Manas Ranjan Majhi,"Recycling coal overburden waste to fabricate functionally graded SiC foam with gradient microstructure via one step thermo-foaming process" Ceramics International,(2024)https://doi.org/10.1016/j.ceramint.2024.06.157

52.Ashutosh Gupta  , Vaibhav Pandey  , Manas Ranjan Majhi "Strengthening bio-circularity by reinforcing waste derived triphasic calcium phosphate to fabricate alumina toughened zirconia bio composite with enhanced bioactivity" Journal of Sustainable Materials and Technologies,https://doi.org/10.1016/j.susmat.2024.e00965 (2024)

51. Durgesh Rai and M.R.Majhi," Reviewing the influence of various nano binder and sintering additives “International Journal of Applied Ceramic Technology(2024)

50.Manish Kumar, M.R.Majhi& R.K.Chturvedi "Wear and friction behaviour of Cu-Gr-B4C composites and correlating to the topographical characteristics" Surface Topography : Metrology and properties, Surf. Topogr.: Metrol. Prop. 12 (2024) 015012

49.  Manish Kumar, A.K.Singh, M.R.Majhi & R.K.Chturvedi “ Tribological Performance of Cu-Gr-B4C Hybrid Composites Prepared by Powder Metallurgy Route” Int. J. of  Surface science and Engineering (2024)

48. A.Gupta, V.Pandey, M.R.Majhi ,Strengthening bio-circularity by reinforcing waste derived Triphasic calcium phosphate to fabricate Alumina toughened Zirconia bio composite with enhanced bioactivity, Sustainable Materials and Technologies (2023)

47.Synthesis and characterization of single-phase magnesium borate nanorod via solution reaction cum sintering process,Singh V.;Pandey  V.;Singh V.K.;Majhi M.R ,Ceramics International, Volume 49, Year 2023, Pages 27086-27093DOI:10.1016/j.ceramint.2023.05.253 

46.Optical, Mechanical, and Physicochemical Properties of Na2O-P2O5-SiO2 Based Tint Glass for Building Construction Applications, Mahapatra D.;Panda S.;Singh S.K.;Singh P.;Kumar A.;Majhi M.R. Silicon, Year 2023,DOI:10.1007/s12633-023-02542-z  

45.Fabrication and characterization of ZrO2 reinforced Fe-20Cr alloy composites

Singh A.K.;Pandey N.;Singh R.;Majhi M.R.Article Physica Scripta, Volume 98, Year 2023,DOI:10.1088/1402-4896/acc431 

44.Tensile and Dry Sliding Wear Properties of Compo-Cast SiO2 Coated ABOw/ Al-319 CompositesPandey N.;Kasana S.S.;Singh A.K.;Gupta A.;Majhi M.R.Article Silicon, Year 2023,DOI:10.1007/s12633-023-02419-

43.A comparative study on physio-mechanical properties of silica compacts fabricated using rice husk ash derived amorphous and crystalline silica,Gupta A.;Pandey V.;Yadav M.K.;Mohanta K.;Majhi M.R Ceramics International, Year 2022

42.Preparation and characterization of semi-silica insulation refractory by utilizing lignite fly ash waste materials,Debnath N.K.;Pabbisetty V.K.;Sarkar K.;Singh A.;Majhi M.R.;Singh V.K. Construction and Building Materials, Volume 345, Year 2022,DOI:10.1016/j.conbuildmat.2022.128321 

41.Fabrication of low to high duty fireclay refractory bricks from lignite fly ash

Debnath N.K.;Boga S.;Singh A.;Majhi M.R.;Singh V.K.Article Ceramics International, Volume 48, Year 2022, Pages 12152-12160,DOI:10.1016/j.ceramint.2022.01.076 

40.Synthesis and Flexural Behaviour of Silica Coated ABOw Reinforced Aluminum Matrix Composites for Structural Application,Neeraj Pandey ., S. C. Ram ., I. Chakrabarty , M. R. Majhi . jurnal in  Mechanical Engineering, Year 2021, Pages 149-158DOI:10.1007/978-981-15-8704-7_18  

39.N.K. Debnath,V.Achariya,S.Jangu,P.Singh,M.R.Majhi&V.K.Singh   "Characterizations of fly as solid waste for low cost insulation refractory bricks, Materials Today:Proceeding,47,1598-1600(2021)

38.Synthesis and Flexural Behavior of Silica Coated ABOw Reinforced Aluminum Matrix Composites for Structural Application,Neeraj Pandey ., S. C. Ram ., I. Chakrabarty , M. R. Majhi  Journal in Mechanical Engineering, Year 2021, Pages 149-158DOI:10.1007/978-981-15-8704-7_18  

37.Performance analysis of deep bed drying of canola seeds using numerical techniqueKumar D.;Mishra A.;Prasad M.;Pyare R.;Majhi M.R, Journal of Stored Products Research, Volume 94, Year 2021,DOI:10.1016/j.jspr.2021.101891  

36.Design analysis of continuous counter-current deep bed drying of corn through modelling and simulation and validation with experiment, 10-12 November 2021, IEEE DOI: 10.1109/ICTAI53825.2021.9673371

35.Kumar D.;Prasad M.;Pyare R.;Majhi M.R.,Proceedings of International Conference on Technological Advancements and Innovations, ICTAI2021, Year 2021, Pages 692-698DOI:10.1109/ICTAI53825.2021.9673371 

34.Niraj Singh Mehta,S. Dey  and Manas R. Majhi,Electro-mechanical characterization of alumina-based porcelain insulator doped with BaTiO3 at high temperature with frequency variation , Materials Chemistry and Physics,2591,24020(2021)

33.Analysis the effect of TiO2 addition on sintering, physical mechanical behaviour of porcelain insulating material Niraj Singh Mehta ., Subhashish Dey ., Vaibhav Singh ., Manas R. Majhi .Applied Surface Science Advances, Volume 4, Year 2021DOI:10.1016/j.apsadv.2021.100083  

32.Microstructure, mechanical and wear properties of aluminium borate whisker reinforced aluminium matrix compositesPANDEY N.;CHAKRABARTY I.;BARKANE K.;MEHTA N.S.;MAJHI M.R. Transactions of Nonferrous Metals Society of China, Volume 30, Year 2020, Pages 1731-1742,DOI:10.1016/S1003-6326(20)65334-1  

31.Effect of SiO2 Coating on Microstructure and Mechanical Behavior of Al-ABOw Composite Synthesized by Powder Metallurgy Technique, Pandey N.;Ram S.C.;Chakrabarty I.;Majhi M.R. Transactions of the Indian Ceramic Society, Volume 79, Year 2020, Pages 188-195,DOI:10.1080/0371750X.2020.1798815  

30.N.Pandey ,S.C Ram , I Chakraborty and M.R. Majhi, Mechanical properties of coated and without coated aluminium boron based refractory castable for petrochemical industry application Material today proceeding,28 ,698-703(2020)

29.N. Pandey, I Chakraborty, P singh, and M. R. Majhi, Effect of sintering temperature on microstructure and Flexural strength of alumina borate whisker, Journal of Material Research Express6,1-10(2019)

28.N. Pandey, S.C Ram, I Chakraborty and M.R. Majhi, Microstructure and mechanical behaviour of ABOw reinforced aluminium matrix composite synthesized by powder metallurgy route Material sc. and Engineering (IOP)653,1-8(2019)

27.Microstructure and Mechanical Behaviour of ABOw Reinforced Aluminium Matrix Composite Synthesized by Powder Metallurgy route,   Neeraj Pandey ., I Chakrabarty ., S C Ram ., M R Majhi . IOP,: Materials  Science and Engineering, Volume 653, Year 2019,DOI:10.1088/1757-899X/653/1/012008  

26.Physical and thermo-mechanical properties of coated and without coated alumina-boron based refractory castable for petrochemical industry applicationPandey N.;Ram S.C.;Chakrabarty I.;Majhi M.R. Materials Today: Proceedings, Volume 28, Year 2019, Pages 698-703DOI:10.1016/j.matpr.2019.12.281 

25.Niraj Singh Mehta, and Manas Ranjan Majhi, Effect of sintering on physical, mechanical and electrical properties of alumina-based porcelains insulator using economic raw materials doped with zirconia Journal of Australian ceramic society, 55,987-997(2019)

24.Sk. S. Hossain, L. Mathur, M. R. Majhi & P. K. Roy Manufacturing of green building brick: recycling of waste for construction purpose Journal of Material Cycles and Waste Management, 539,281–292(2019)

23.Niraj Singh Mehta, Praveen Kumar Sahu, Pankaj Tripathi, Ram Pyare, Manas R. Majhi, Influence of alumina and silica addition on the Physico- Mechanical and dielectric behaviour of ceramic porcelain insulator at the high sintering temperature ,Journal of the Spanish Ceramic and Glass Society,57,151-159(2018)

22.Niraj Singh Mehta, Praveen Kumar Sahu, Md Ershad, Vipul Saxena, Ram Pyare and Manas R Majhi,Effect of ZrO2 on the sintering behavior, strength and high- frequency dielectric properties of electrical ceramic porcelain insulator Mater. Res. Express,5,1-11(2018)

21.Niraj Singh Mehta , J . C Pandey,Neeraj Pandey , Ram Pyare  and Manas Ranjan Majhi Developing a high strength physico- mechanical and electrical properties of ceramic porcelain insulator using zirconia as an additive Materials Research Express5,1-12(2018)

20.L.Mathur, SKS Hossin,,M.R.Majhi and PK Roy, Synthesis of nano crystalline foresterite (MgSiO4) powder from bio-mass rich husk silica by solidstate routeJ ournal of the Spanish Ceramic and Glass Society,57 ,112-118(2018)

19.Fractal and thermal diffusivity of porous spinel develop by ex-potato statchSaurav K.;Singh V.;Majhi M. Rasayan Journal of Chemistry, Volume 10, Year 2017, Pages 92-98DOI:10.7324/RJC.2017.1011580  

18.Development Concepts for Porous Periclase MgOSaurav K.;Majhi M.;Singh V. Materials Today: Proceedings, Volume 4, Year 2017, Pages 9566-9570,DOI:10.1016/j.matpr.2017.06.225  

17.Heating and phyiso-mechanical characteristics of porous spinel developed by Starch,Saurav K.;Majhi M.;Singh V.Journal of Ceramic Processing Research, Volume 17, Year 2016, Pages 1019-1023

16. A.Bharadwaj, SKS.Hission and MR Majhi, Preparation and characterization of clay bonded high strength silica refractory by utilizing agriculture waste Journal of the Spanish Ceramic and Glass Society,56,256-262(,2017)

15.SKS Hossin,L.Mathur .P Singh and M.R.Majhi, Dev.of forsterite refractory using highly abundant amorphous rice husk silica for thermal insulation ,Journal of Asian ceramic society5,82-87(2017)

14.Development of zirconia substituted 1393 bioactive glass for orthopaedic application,Yadav S.K.;Ray S.;Ershad M.D.;Vyas V.K.;Prasad S.;Ali A.;Yadav S.;Majhi M.R.;Pyare R, Oriental Journal of Chemistry, Volume 33, Year 2017, Pages 2720-730DOI:10.13005/ojc/330605  

13.Destructive and non-destructive properties of cobalt oxide substituted 1393 bioactive glassYadav S.K.;Vyas V.K.;Anand P.;Majhi M.R.;Pyare R.Rasayan Journal of Chemistry, Volume 10, Year 2017, Pages 935-943,DOI:10.7324/RJC.2017.1031808 

12.Synthesis and characterization of forsterite refractory by doping with kaolin,Bhargavi Rani A.;Raja Annamalai A.;Majhi M.;Harish Kumar A.International Journal of ChemTech Research, Volume 6, Year 2014, Pages 1390-139

 11.Implementation of industrial waste ferrochrome slag in conventional and low cement castables: Effect of microsilica addition’Kumar P.H.;Srivastava A.;Kumar V.;Majhi M.R.;Singh V.K. Journal of Asian Ceramic  Societies, Volume 2, Year 2014, Pages 169-175 DOI:10.1016/j.jascer.2014.03.004  

10.R. K. Chaturvedi,. Ram Pyare andM.R.Majhi, Role of low solubility glasses as a source of plant nutrients-A review paper based on ‘ an effort to protect fertility of land(soil) against chemical fertilizer effectsBrazilian Ceramic Society,2,457-463(2014)

9.M. R. Majhi, Ram Pyare, and S. P. Singh, Studies on Preparation and Characterizations of CaO–Na2O–SiO2–P2O5 Bioglass Ceramics Substitutedwith Al2O3, TiO2 and ZrO2Journal of Biomaterials and Tissue Engineering,2,1–17(2012)

8.M.R Majhi, R. Pyare and S.P Singh, Preparation and Characterization of CaF2 Doped Bioglass ceramicsJournal of Biomimetics, Biomaterials & Tissue Engineering 11,45-66 (2011)

7.M.R Majhi, R. Kumar,S.P Singh and R. Pyare,Physico-chemical Properties and Characterization of CaO-Fe2O3-P2O5glass as a Bioactive Ceramic MaterialJournal of Biomimetics, Biomaterials & Tissue Engineering,12,1-24(2011)

6.M.R. Majhi, Ram Pyare and S.P.Singh,Studies on Preparation and Characterization of Na2O-CaO-P2O5-ZrO2 Bioglass-ceramics International Journal of Scientific & Engineering Research2,1-13(2011)

5.M.R. Majhi,, Ram Pyare and S.P.Singh,Studies on preparation and characterizations of CaO-Na2O-SiO2-P2O5 bioglass ceramics substituted with Li2O, K2O, ZnO, MgO, andB2O3International Journal of Scientific & Engineering Research,2,1-9{2011)

4.Nirmal Singh&M.R.Majhi"Invitro charecterizations of silicate based bio-glass,Indocerams,48,113-116(2010)

3.M.R.Majhi& Ram Pyare "Phisico-chemical  properties of 45S5 bioactive glasses "Indoceram,46,42-49(2009)

2.M.RMajhi &Ram Pyare :Leachibility of copper ions fron ternary phosphate glass,Indoceram, 44,47-52(2007)

1.M.R.Majhi &Ram Pyare "Invitro chracterization of phosphate based bioglass ceramics doped with B2O3 ,Indoceram,45,8-16(2008)

23.Asteek Raj & M.R.Majhi " Fabrication Of Functionally Graded SiC-Foam with Gradient Microstructure using CMW "Technical paper  present in the REFIS 4.0, 2024 was held on April 12-13,2024 at Bokaro Steel plant  , Jharkhand.

22.M.RMajhi " Synthetic raw material and its industrial application" Technical paper  present in the Indian Ceramics Asia was held on March 6-8,2024 at Gandhinagar ,Gujarat.

21.Asteek Raj & M.R.Majhi "Physico-Mechanical Characterization of Magnesium Borate Nano-rod doped Alumina Compositepaper present in the 87th Annual Session of the Indian Ceramic Society was held on  December 19-21, 2023 at Kolkata. 

20. Durgesh Rai & M.R.Majhi "Influence of sintering additives on the Performance of High-Alumina Nano-Bonded Refractory Castables"  Poster Presentation in the 87th Annual Session of the Indian Ceramic Society  Society was held on  December 19-21, 2023 at Kolkata.

19.Manish Kumar & Manas Ranjan Majhi, "Tribological performance of Cu-Gr-SiC Hybrid Composites Prepared by Powder Metallurgy route"  Poster Presentation in the 87th Annual Session of the Indian Ceramic Society was held   on December 19-21, 2023 at Kolkata.

18. Ashutosh Gupta, Abhishek Kumar Singh, Manish Kumar, Vaibhav Kumar Singh, V.K Singh& M.R Majhi ,"A comparative investigation of the physio-mechanical characteristics of amorphous and crystalline silica extracted from rice husk ash "International Conference on Future of Refractories in Iron & Steel Industries REFIS 4.0” was  held on 23rd-24th Sep’2022 at Bokaro Steel City.  

17. Manish Kumar,M.R.Majhi &R.K.Chaturvedi,"Microstuctural ,tribological and mechanical properties of copper matrix reinforcement with graphite  boron carbides hybrid composites ;International conference  on global trends in traditional to space ceramics ; 8th -9th Dec ,2022.

16. Vaibhav Singh, Ashutosh Gupta, Abhishek Kumar Singh, Manish Kumar, V.K Singh, M.R Majhi  "Effect of thermal treatment on phase and microstructural evolution of magnesium borate (Mg2B2O5) nanorod whiskers prepared via hydrothermal cum reaction sintering process "International Conference on Future of Refractories in Iron & Steel Industries REFIS 4.0” was  on 23rd-24th Sep’2022 at Bokaro Steel City.  

15. Ashutosh Gupta ,V.Pandey  & M.R..Majhi "Phisco-mechanical properties of silica compacts fabricated  using rice husk ash derived from amorphous and crystaline silica ",13-14 dec.2021,Gulberga.Karnataka

14...M.R.Majhi "Fly ash utilization in India-Strategies for enhancement" India(2021)

13.M.R. Majhi " Powder metallurgy route for fabrication of ABOw reinforced aluminum nanocomposites",   Thailand (2019)

12..Neeraj Pandey and M.R.Majhi "international conference on recent advance in material and manufacturing technologies ,Dubai (2019)

11.Neeraj Pandey and M.R.Majhi  "International conference on innovative technology in mechanical engineering" Ghaziabad (2019)

10..M.R. Majhi " To develop porcelain ceramics bodies doped with ZrO2 and TiO2 for improvement of its physical and mechanical strength "Thailand(2018)

9..S.k S Hossain, L. Mathur, Pradip K Roy, Manas R Majhi(2017)Preparation and characterization of forsterite (Mg2SiO4) at low temperature by rice husk”, International Conference on Computer Communication Chemical Materials & Electronic Engineering University of  Rajshahi, Bangladesh

8.Sk S Hossain, ,Aman Bhardwaj, Manas R Majhi(2017)Preparation & characterization of light weight, high strength, insulating refractory by different wastes ,Jamshedpur

7..Kumar Saurav,V.K.Singh,M.R.Majhi(2016)Mechanical characteristics of porous spinel developed by starch, Hyderabad

6..Rohit Gupta and  M.R.Majhi(2015)Reticulated phenol formaldehyde polymer matrix doped with refractory material for aerospace application ,Indian Cer. Society,at Jamshedpur

5.P.Hemnta Kumar,A. Srivastav,V.Kumar,M.R.Majhi,and V.K.Singh  (2014)Implementation of industrial waste ferrochrome slag in conventional and low cement castable:  Effect of micro silica addition  
Indian Cer. Society,at Jamshedpur

4.M.R.Majhi, R. Pyare and S.P.Singh (2012) Preparation and characterization of 45S5  bioglass ceramics  substituted with Al2O3, TiO2 and ZrO2,Indian Cer. Society, at AGRA

3..M.R.Majhi, R.Pyare and S.P.Singh(2011) Studies on Preparation an d Characterization of  Na2O-CaO-P2O5- ZrO2 Bioglass-ceramics”Indian Cer. Society, at Kolkota.

2.M.R.Majhi ,R.Pyare and S.P.Singh( 2009) Preparation and characterization of CaF2 Doped Bioglass ceramics,Indian Cer. Society, at Jaipur.

1.M.R.Majhi, R.Pyare and S.P.Singh(2008) Physico-chemical Properties and Characterization of  CaO-Fe2O3-P2O5 glass as a Bioactive Ceramic MaterialIndian Cer. Society, at Bangalore.

1.Mr.Kumar Saurav,Preparation and characterization of zirconia spinel composite ,Supervisor(2013)

2.Mr.Niraj Singh Mehta,Synthesis and characterization of forsterite with kaolin as an additive, Supervisor(2013)

3.Ms. Ritu Mukherjee,Effect on doping on corrosion behavior of MgO based refractory,Supervisor(2014)

4.Mr. Kaushik Sarkar ,Evaluation of magnesia-spinel in RH degasser ,Supervisor (2014)

5.Mr. Praveen Kumar , Tribological behavior of metal-ceramic composites,Supervisor(2014)

6.Mr.Dharmendra Dubey ,To study the role of titania  in reaction sintering of magnesia –alumina system ,Supervisor(2015)

7.Mr.Parm Veer Singh,Synthesis and characterization of forsterite with feldspar as an additive,Supervisor(2015)

8.Mr.Gourav Jawale, Synthesis and characterization of zirconia doped electrical porcelain insulator Supervisor(2016)

9.Mr.Niraj Kumar,Synthesis and characterization of Al2O3-SiO2-MgO composite material,Supervisor(2016)

10.Mr.Rajesh Suthar2016Enhancement of the insulation properties of fireclay brick using coconut shellSupervisor

11.Mr.Sunil Kumar Viswakarma2016Synthsis and characterization of Al2O3-ZrO2-Si2O2 composite material ,Supervisor(2016)

12.Mr.Abhishek Kumar Singh,Enhancement of insulating properties of fireclay bricks by using silica, Supervisor(2017)

13.Mr.Vibhav Singh ,Synthesis and characterization of porcelain material and enhancing its physical and mechanical properties by using ZnO as a substitute for quartz Supervisor(2017)

14.Mr.Virendra Kumar Jarwal ,Synthesis and characterizations of spinel doped with titania and silica,Supervisor(2017)

15 Mr.Silendra Kumar Singh,Developed properties of Fly ash Refractory brick, Supervisor(2018)

16.Mr.Kushgra Shina,Developed   the strength of porcelain insulator doped with ZnO, Supervisor(2018) 

17.Mr.Kalpana Barkin ,Synthesis and Characterization of Al-Al18B4O33 (ABOw)Composite by Powder Metallurgy,Supervisor(2019)

18.Mr.Akash AgrawaL,Synthesis and Characterization of Alumina –Borate Coated Refractory Castables,Supervisor(2019)

19.Mr. Aman Pal, To study the effect of addition of nano-ni particles as catalyst on microstructure & properties of mgo-c refractory,Supervisor(2020)

20.Mr.Utkarsh Saxena, Application of stainless steel as an alternative aluminum and carbon fiber composites for deep space missions ,Supervisor(2020)

21.Mr. Harikeswar Pandey ,Development of low cost glaze using waste materials ,Supervisor(2020)

22.Mr.Sourabh Yadav, Utilization of Marble Dust in Fire Clay Refractory Bricks, Supervisor(2020)

23.Mr.Aditya Rana ,Microstructure and Corrosion Behavior ofABOw Reinforced aluminum Matrix Composite Synthesized by Powder Metallurgy ,Supervisor(2020)

24.Mr.Durgesh  Rai , Preparation and characterizations of alumina-zirconia-silica(AZS)refractories for application in glass industries”Supervisor(2021)

25.Mr.Aman Ku Verma , Synthesis and Characterization of Fe-Si/SiC Metal Matrix Composites by Powder Metallurgy Supervisor(2021)

26.Mr.Shubham Marandi  , Synthesis  and Characterization of Fe-Si/TiC metal matrix composites by powder metallurgy,Supervisor(2021)  

27.  Mr.Ujjawal Kumar, Development of novel high alumina refractory doped with zirconia nano particles for non-ferrous industries (2022)

28. Mr.  Priyank Srivastava, Development of novel  silica refractories doped with alumina nano particles for ferrous industries(2022)

29. Mr.Durgesh Patel,   Development of high strength ceramic materials using egg shell and rice husk(2022)

30. Mr.Abhay Agarwal , Development of alumina refractories for blast furnace shaft application (2022)

31.Mr.Gaurav Shoora, Porous SiC-Alumina composite for high efficiency hot flue gas filtration (2023)

32.Mr.Adhar Kansal ,   Physical and Mechanical properties of ZTA-hydroxyapatite bio composite (2023)

33. Mr.Varun Bhutada , Physical and Mechanical properties of silica doped ZTA composites.(2023) 

34.Mr.Adarsh Kumar Singh, Development of nano bonded refractory for petrochemical industry,(2024)

35.Mr.Akash Gupta, Alumina Toughened Zirconia(ATZ) Reinforced with SiO2 and Animal Waste Bone(AWB) Additives for Orthopedic and Dental Applications,(2024)

36.Mr.Asteek Raj, Physico-Mechanical Characterization of Magnesium Borate Nano-material doped Alumina Composite,(2024)




1.Kumar Saurav ,Preparation and characterization of high strength porous spinel and ZrO2-spinel by potato starch, Supervisor, Awarded  Ph.D  (2017)
2.Niraj Singh Mehta ,To develop high physico-mechanical and dielectric (in microwave frequency) properties of ceramic porcelain insulators, Supervisor ,Awarded  Ph.D  (2018)
 3.Sandeep Ku. Yadav ,In-vitro bio-activity and physical-mechanical properties of substituted 1393 bioactive glasses, Co-supervisor, Awarded  Ph.D  (2019)

 4.Nayan Devnath ,Optimization and Characterizations of alumino-silicate refractories based on lignite fly ash  ,Co-supervisor, Awarded Ph.D( 2023)

5.Neeraj Pandey ,Synthesis, characterization and Mechanical  properties  of Coated and Uncoated ABOw Reinforced in Aluminum Matrix Composites  , Supervisor , Awarded  (2022)

6.Dhiraj Kumar, Drying of particulate materials and ceramic materials, Ph.D. Coordinator(Supervisor), Awarded(2022)
7. Abhishek Kumar Singh, Fabrication and Characterization of Fe-Cr Metal Matrix Composites Reinforced with Ceramic materials , Supervisor , Registration year 2017

8.Vibhav singh, Synthesis and Characterization of Magnesium Borate whisker at different sintering temperature ,Supervisor, Registration year 2017
9. Ashutosh Gupta., “Synthesis  and  physico-mechanical characterization and biocompatibility evaluation of waste derived bioceramic composites”, Supervisor, Pre-PhD seminar completed  on 31-07-2023.

10.Manish Kumar, Micro structural, tribological and mechanical behavior of copper matrix reinforcement with graphite-B4C hybrid composites, Co-Supervisor, Registration year Jan.2019 

1.A Method for Preparing Tiles and composition Thereof ,Sk S. Hossain, Lakshya Mathur, Preetam Singh& Manas Ranjan Majhi,201631039979(23.11.16) Patent wire Consultants Pvt. Ltd. | Patent & Technology Consultants/India, Awarded(22.8-2023)

2.A Composition for Bricks From Waste Materials and Method of Manufacturing the sameSk S. Hossain, Lakshya Mathur, &Manas Ranjan Majhi201631030744(08/09/2016)Patent wire Consultants Pvt. Ltd. | Patent & Technology Consultants/India, Awarded(29.8.19)

3.A Biomass Composition for Thermal Insulation and Method of Manufacturing the same Sk S.Hossain, Aman Bhardwaj& Manas Ranjan Majhi201611024361 (7.7.17)Patent wire Consultants Pvt. Ltd. | Patent & Technology Consultants/ India ,Awarded(29.4.24)

4.Fabrication of Tri-phasic Calcium phosphate doped Alumina toughened Zirconia (ATZ) bio composite.:M.R.Majhi,, A.Gupta & V.Pandey ,M/s. Patent wire  Consultants Pvt Ltd,2023.

Sponsoring Organisations                             Title of Project PI /Co-PI



National Project Implementation Unit, Ministry of Education, Govt. of India.

Development of nano bonded magnesium borate refractory castable application for petrochemical industry


Development  of high dielectric constant and low loss tangent film CCTO capacitor by spin coating

2023-2026 (PI)



AICTE (RPS) Studies on preparation and Characterization of  bio-glass Completed


Research Project
Preparation and Characterization of  Fe2Odoped  bio-glass ceramics Completed


(Research Grant)
Characterization of  CaF2 doped  bio-glass ceramics Completed


IIT(BHU)-SGF scheme To Develop Fabrication & Characterization Techniques for Bio-Ceramics, Polymer Matrix Composites and High Temperature Cement Castable  Refractories


R&D support grant
Preparation and applications of AZS refractories Completed

1.Warden of Vivekananda Hostel, Sept.2013 to Oct.2018, IIT(BHU)
2.Convener of Senate Library Committee,Oct.2012-Mar.2014, IIT (BHU)
3.In-Charge of Refractory Lab., July2012-Till date, Dept. of Ceramic Engg,IIT (BHU)

4.Convener of  DUGC  , Sept.2014- Aug. 2015 ,Dept. of Ceramic Engg.,IIT (BHU)

5.Convener of  DPGC  ,Sept.2018- Aug. 2019 ,Dept. of Ceramic Engg.,IIT (BHU)

6.Convenor of DPGC ,Sept.2021 -Aug.2022.Dept. of Ceramic Engg,IIT(BHU)

1.Assistant Professor from 30-10-2007 to 10-12-20015 ,Ceramic Engineering ,IIT(BHU)

2.Associate Professor from 11-12-2015 to till date, Ceramic Engineering ,IIT(BHU