Home Research Publication II

 

News & Notices

Research Publications in Journals

List of scientific/ technical Books written by Faculty Members in the Department.

1. Dr. S.K. Sinha: Computer Numerical Control

2. Prof. H.N. Gupta        Internal Combustion Engine

 

Research Publications in Journals

List of Research Publications in SCI Journals coming from the Department during the last five years (Authors Names, Title of Paper, Name of the Journal, Volume, Page nos., Year).

Publications at National Level:

S.Singh, R.K.Singh, A.K.Jha and S.Kumar.Sinterd Preforms Adds Better Value to Aerospace Components Journal of the Institution of Engineers (I), AS Vol. 82, May 2001, pp 1-16.

A.K.Jha, S.Singh and S.Kumar “A Computer Simulation Technique to Estimate Die Load and Energy during Sinter-Forging Process”,. Journal of the Institution of Engineers (I), PR Vol. 83, September 2002, pp 27-33.

A.K.Gupta and A.K.Jha, “Closed Die Forging of Powder Preforms”, Journal of Institution of Engineers PR Vol 85, March 2005.

Publications in International Journal:

Ghosh, M.K and Nagraj, A., “Rotordynamic Characteristics of Multilobe Hybrid Journal Bearing in Turbulent Lubrication”, Proc. Instn. Mech. Engrs., Part J, Journal of Engineering Tribology, Vol. 218, pp. 61-67, 2004.

Ranjan, V. and Ghosh, M.K., “Vibration Analysis of Thin rectangular Plate With Added Discrete Masses and Discrete Patches” A Fusion of Harmonics, Proceedings of the 3rd International Conference on Vibration Engineering And Technology of Machinery and the 4th Asia-Pacific Conference On System Integrity And Maintenance, 2004, Vol-I, pp. 301-309 and in “Advances in Vibration Engineering”, Journal of the Vibration Institute of India, Vol.5, N.3, pp. 191-200, 2006.

Ghosh, M.K and Dinavahi, R.., Vibration Analysis of a Vehicle System Supported on a Damper-Controlled Variable Spring Stiffness Suspension”, Proc. of I. Mech. Engrs., U.K., Part D, Journal of Automobile Engineering, Vol.219, pp.607-619, 2005.

Ranjan, V. and Ghosh, M.K., “Transverse Vibration of Thin Plate with Attached Discrete Dynamic Absorbers”. Thin Walled Structures, Vol. 43, pp.1513 -1533, 2005.

Ranjan V. and Ghosh, M.K., “Transverse Vibration of Thin Solid and Annular Circular Plate with Attached Discrete masses” Journal of Sound and Vibration, Vol.292, 3-5, pp. 999-1003, 2006.

Ghosh, M.K. and Gautam, S.S., “Dynamic Characteristics of Non-Circular Tapered Annular Seal Considering Fluid Inertia Effects in Turbulent Flow”, Proc. International Symposium on Stability Control of Rotating Machinery (ISCORMA-3), Cleveland, USA, Sept. 19-23, 2005.

Ghosh, Pradyumna., and Ghosh, M.K., “Transient Analysis of Thermal Convection in Square Porous Cavity under Transverse Sinusoidal Micro Gravity Field” , Proc. 18th National and 7th ISHMT – ASME Heat and Mass Transfer Conference held at IIT Guwahati Jan. 4-6, 2006.

Anandan, N., Pandey , R.K., Jagga ,C. R. and Ghosh, M.K, “Effects of Starvation and Viscous Shear Heating in Hydrodynamically Lubricated Rolling/Sliding Line Contacts”, Proc. IMechE. Part J, Journal of Engineering Tribology, Vol.220, N6, pp.535-547, 2006.

Ghosh, Pradyumna. and Ghosh, M. K., “Thermal Convection in Square Porous Cavity under Transverse Oscillatory Micro Gravity Field”, Microgravity Science and Technology, Vol. XIX/1, pp. 25-32, 2007.

Gautam, Satyam., and Ghosh, M.K., “An Approach to Calculate Leakage Flow, Stiffness and Damping of Annular Seals in Turbulent Flow using Lubrication Theory, Part I: Analysis” , Tribology Online, JST, Vol.2 ,No. 4, pp.93-98, 2007.

Gautam, Satyam., and Ghosh, M.K., “Leakage Flow, Stiffness and Damping of Annular Seals in Turbulent Flow using Lubrication Theory, Part II: Results”, Tribology Online, JST, Vol.2, No. 4, pp. 99-104, 2007.

Suresh, Arjula., Harsha, A.P., and Ghosh, M.K. “Solid-Particle Erosion Behaviour of High-Performance Thermoplastic Polymers”, Journal of Materials Science 43, pp.1757-1768, 2008.

Suresh Arjula, A.P. Harsha, and Ghosh, M.K., “Erosive Wear of Unidirectional Carbon Fiber Reinforced Polyetherimide Composite”, Materials Letters, 62, pp.3246-3249, 2008.

Arjula Suresh, A.P. Harsha, M.K. Ghosh, “Solid Particle Erosion Studies on Polyphenylene Sulfide Composites and Prediction on Erosion Data Using Artificial Neural Networks”, Wear , 266 (2009) 184-193.

Pradyumna Ghosh, M.K.Ghosh, “Streaming Flows in Differentially Heated Square Porous Cavity under Sinusoidal g-jitter”, International journal of Thermal Science, 48 (2009), pp. 514-520

M.K. Ghosh and M.R. Satish, “Rotordynamic Characteristics of Multilobe Hybrid Bearings with Short Sills – Part I”, Tribology International, Vol. 36, No. 8, pp. 625-632, 2003.

M.K. Ghosh and M.R. Satish, “Stability of Multilobe Hybrid Bearings with Short Sills – Part II”, Tribology International, Vol. 36, No. 8, pp. 633-636, 2003.

M.K. Ghosh, R.K. Pandey and P. Singh, “Thermal Effect on the Film Thickness in High Speed   Lubricated Cold Rolling of a Strip - An Inlet Zone Analysis”, Proc. Instn. Mech. Engrs., Vol. 217, Part J, Journal of Engineering Tribology, pp. 155-165, 2003.

M.K. Ghosh and R. Dinavahi, (2005) “'Vibration Analysis of a Vehicle System Supported on a Damper-Controlled variable Spring Stiffness Suspension” Proc. of ImechE , UK, Part D, Journal of Automobile Engineering, Vol. 219.

V. Ranjan, and M.K. Ghosh “Forced Vibration response of Thin Plate with Attached Discrete Dynamic Absorbers.” International Journal of Thin Walled Structures, vol. 43, 2005, pp 1513-1533.

V. Ranjan and M.K. Ghosh “Transverse Vibration of Thin Solid And Annular Circular Plate With Attached Discrete Masses.” International Journal of Sound And Vibration. Vol.292, 3-5, pp. 999-1003, 2006

Sarajit Singh and A.K.Jha. “Analysis of Dynamic Effects during High-Speed Forging of Sintered Preforms”, Journal of Materials Processing Technology, UK, Vol.112, 2001 pp 53-62.

V.P. Singh & S.Kumar , (2005) “A solution to a specially orthtropic axisymmetric thin shell subjected toa harmonic boundary condition with inclusion of dynamic coupling”, J of structural Engineering , 31, 4, pp. 257-264 .

V.P. Singh & S.C. Saroj, (2005) “An approximate solution to a specially orthotropic ax symmetric shell subjected toa harmonic boundary condition with inclusion of structural damping”, Advances in Vibration Engineering , 4, 1, pp.49-66.

J.P. Dwivedi , S.K. Shah, P.C. Upadhyay and N.K. Das Talukdar, (2002) “Springback analysis of thin rectangular bars of non-linear work-hardening materials under torsional loading” , Int. J. of Mech. Science , vol.44, pp.1505-1519.

Saranjit Singh, A.K.Jha and S Kumar “An Energy Analysis During Forging of Sintered Truncated Conical Preform at High Speed”, , Tankang Journal of Science & Engineering, An International Journal, Vol.7, No 4, 2004, pp227-236.

Saranjit Singh, A.K.Jha and S Kumar “Influence of various Processing Parameters on Deformation and Fracture Characteristics of Sintered Preforms During Cold Forging” Journal of Manufacturing Technology and Research (An International Journal of Manufacturing Research) Vol.1, No2, July2005.

Saranjit Singh, A.K.Jha and S.Kumar “Forging of Sintered Components: Technology Management Issues” , Manufacturing Technology Today, Vol.5, Issue 2, Feb.2006.

H. Kawada and V.K. Srivastava, (2001)The Effect of an Acidic Stress Environment on the Stress-Intensity Factor for GRP Laminates”, COMPOSITES SCIENCE AND TECHNOLOGY, 61, 8, 1109-1114.

V.K. Srivastava and H. Kawada, (2001)Fatigue Behaviour of Alumina - Fibre - Reinforced Epoxy Resin Composite Pipes Under Tensile and Compressive Loading Conditions”, COMPOSITES SCIENCE AND TECHNOLOGY, 61, 16, 2393-2403.

P.K. Govindan Potti, B. Nageswara Rao and V.K. Srivastava, (2001)Tensile Fracture Strength of Boron/Aluminium Laminates with Holes and Slits, MATERIALS SCIENCE AND ENGINEERING - A, 301, 2, 244-252.

P.K. Govindan Potti, B. Nageswara Rao and V.K. Srivastava, (2001) Fracture Strength of Composite Laminates Containing Surface Notches, ADVANCED COMPOSITE MATERIALS, 10, 1, 29-37.

V.K. Srivastava and D. Kumar, (2002) Prediction of Notched Strength of Laminated Fibre Composites Under Tensile Loading Conditions, J. COMPOSITE MATERIALS, 36, 9, 1121-1133.

V.K. Srivastava, (2002) Notched Strength Prediction of Laminated Composite Under Tensile Loading, MATERIALS SCIENCE AND ENGINEERING - A, 328, 1-2, 302-309.

V. K. Srivastava, (2003) Characterisation of Adhesive Bonded Lap Joints of C/C-SiC and Ti-6AI-4V Alloy Under Varying conditions, INT.J.ADHESIION & ADHESIVES, 23, 1, 59-67.

V. K. Srivastava, (2003) Wear Behaviour of C/C-SiC Composites Sliding Against High-Cr Steel Discs, Z. METALLKUNDE, 94, 4, 458-462.

V. K. Srivastava, K Maile, K.Bothe and A Udoh, Effect of Damage on Flexural Modulus of C/C-SiC Composites, MATERIALS SCIENCE AND ENTINEERING-A, 354, 1-2, 292-297, 2003.

U. Mayer, V. K. Srivastava and K. Maile, (2003) Determination of Dynamic Stress Intensity Factor of C/C-SiC Composites, J. Phys. IV France, 110,735-740.

V. K. Srivastava, K. Maile, K. Bothe and A. Udoh, (2003) Effect of Impact Damage on Electrical Resistivity of C/C-SiC Composites”, Z.METALLKUNDE, 94, 8, 930-933.

V. K. Srivastava, A. Udoh, H. P. Maier, P.Knoch and K. Maile, (2004) Eddy Current Nondestructive Mapping of C/C-SiC Composites, FORSCHUNG IM INGENIEURWESEN, 68, 3, 169-172.

V. K. Srivastava and K. Maile, (2004)Measurement of stress intensity factor of C/C-SiC Composites under dynamic and static loading conditions”, COMPOSITES SCIENCE AND TECHNOLOGY, 64, 8, 1209-1217.

P. K. G. Potti, B. N. Rao and V. K. Srivastava, (2004) Notched strength estimations of graphite/epoxy composite laminates containing central holes and cracks. A Statistical approach, The journal of the Royal Aeronautical Society, May, p.263-269.

A. P. Harsha, U. S. Tewari, B. Venkatraman, Three-body abrasive wear behaviour of polyaryletherketone composites, Wear 254 (7-8) (2003) 680-692.

A. P. Harsha, U. S. Tewari, B. Venkatraman, Solid particle erosion behaviour of various polyaryletherketone composites, Wear 254 (7-8) (2003) 693-712.

A. P. Harsha, U. S. Tewari, Tribo performance of polyaryletherketone composites, Polymer Testing 21 (2002) 697-709.

A. P. Harsha, U. S. Tewari, Two-body and three-body abrasive wear behaviour of polyaryletherketone composites, Polymer Testing 22 (2003) 403-418.

A. P. Harsha, U. S. Tewari, The effect of fibre reinforcement and solid lubricants on abrasive wear behaviour of PEEK composites, Journal of Fibre Reinforced Plastics and Composites 22 (8) (2003) 751-767.

A. P. Harsha, U. S. Tewari, Tribological studies on glass fibre reinforced polyetherketone composites, Journal of Fibre Reinforced Plastics and Composites 23 (1) (2004) 65-82.

U. S. Tewari, A. P. Harsha, A. M. Häger, K. Friedrich, Solid particle erosion of unidirectional carbon fibre reinforced polyetheretherketone composites, Wear 252 (2002) 992-1000.

U. S. Tewari, A. P. Harsha, A. M. Häger, K. Friedrich, Solid particle erosion of carbon fibre- and glass fibre- epoxy composites, Composite Science and Technology 63 (2003) 549-557.

A. P. Harsha, U. S. Tewari, Abrasive wear of glass fibre reinforced polysulfone composites, Indian Journal of Engineering & Material Science 9 (2002) 203 -208.

Suresh Arjula, A.P.Harsha, Study of erosion efficiency of polymers and polymer composites, Polymer Testing 25 (2006) 188-196.

A.P. Harsha, Avinash A. Thakre, Investigation on Solid Particle Erosion Behaviour of Polyetherimide and its Composites, Wear 262 (2007) 807-818.

A.P.Harsha, D.S.Nagesh, Prediction of weight loss of various polyaryletherketones and their composites in three-body abrasive wear situation using artificial neural networks, Journal of Fibre Reinforced Plastics and Composites, (In press, Appear in 2008)

R.K. Misra, K. Sandeep and Ashok Misra, (Available online) Analysis of Anisotropic Plate using Multiquadric Radial Basis Function, Enginering Analysis with Boundary Elements, Elsevier.

B Pradhan, K Sandeep, S Mansor, A R Ramli and A R B M Sharif, (In Press), Second Generation Wavelet Based GIS Terrain Data Compression Using Delaunay Triangulation , International journal of Engineering Computations, Emerald Group Publishing Limited.

B. Pradhan, K. Sandeep, S. Mansor “Droplet Based GIS Terrain Data Compression Using Delaunay Triangulation” , International journal of Engineering Computations, Emerald Group Publishing Limited.

B. Pradhan, K. Sandeep, S. Mansor, Abd. R Ramli and A. M. Rashid, 2005, “A Fast Processing Algorithm for Remote Sensing Data Compression (LIDAR) Using Second Generation Wavelet”, Korean Journal of Remote Sensing, vol. 22, no. 1 pp. 49-61.

I. V. Singh, K. Sandeep and R. Prakash, 2005 “The effect of weight function and scaling parameter on mesh less EFG results in heat transfer problems”, International Journal of Heat & Technology, Vol 23, n. 1, pp. 13-20.

S.P. Harsha, K. Sandeep and R. Prakash, 2004, “Nonlinear Dynamic Behaviors of Rolling Element Bearings Due to Surface Waviness”, Journal of Sound and Vibration. Vol 272, pp 557-580.

I.V. Singh, K. Sandeep and R. Prakash, 2004, “Application of meshless element free Galerkin method in two-dimensional heat conduction problems”, Computer Assisted Mechanics and Engineering Sciences, Vol. 11, pp. 265-274.

S.P. Harsha, K. Sandeep and R. Prakash 2004, “Nonlinear Dynamic Response of a Rotor Bearing System Due to Surface Waviness”, Nonlinear Dynamics, Vol 37, pp 91-114.

I.V. Singh, K. Sandeep and R. Prakash, 2003, “Heat Transfer Analysis of Two-Dimensional Fins using Meshless Element-Free Galerkin Method”, Numerical Heat Transfer: Part A, Vol. 44, pp. 73-84.

S.P. Harsha, K. Sandeep and R. Prakash, 2003, “The Effect of Speed of Balanced Rotor on Nonlinear Vibrations Associated With Ball Bearings”, International Journal of Mechanical Sciences, Vol.47, n. 4, pp. 225-240.

S.P. Harsha, K. Sandeep and R. Prakash, 2003, “Effects of Preload and Number of Balls on Nonlinear Dynamic Behavior of Ball Bearing System”, International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 4, n. 3, pp. 265-279.

I.V. Singh, K. Sandeep and R. Prakash, 2003, “Meshless EFG method in transient heat conduction problems”, International Journal of Heat & Technology, Vol. 21(2), pp. 99-105.

S. P. Harsha, K. Sandeep and R. Prakash, 2003, “Quasi-periodic, Subharmonic and Chaotic Motions of a Rotor Bearing System”, International Journal of Nonlinear Sciences and Numerical Simulation, Vol 4, n 3, pp 361-372.

S.P. Harsha, K. Sandeep and R. Prakash, 2003, “Nonlinear Dynamic Behaviors of High Speed Rotor Supported By Rolling Element Bearings”, International Journal of Applied Mechanics and Engineering, Vol 8, n 4, pp 705-720.

I. V. Singh, K. Sandeep and R. Prakash, 2002, “The Element Free Galerkin Method in Three-Dimensional Steady State Heat Conduction, International Journal of Computational Engineering Sciences, Vol. 3, n. 3, pp. 291-303.

Pradhan, B., Sandeep, K., Mansor, S., Ramli Abd. R. and Rashid A. M. “Multiresolution Spatial Data Compression Using Lifting Scheme” International Journal of Applied and Numerical Harmonic Analysis: A Birkhäuser book, Springer (In press)

P. Shukla, R.K. Mandal and S.N. Ojha, “Microstructural Modifications Induced by Spray Forming of Al-Cu Alloys”, Mat. Sci. & Engg. 304-306 (2001) 583-586.

P. Shukla, R.K. Mandal and S.N. Ojha, “Non-equilibrium Solidification of Under cooled Droplets during Spray Atomization”, Bull. Mater. Sci., 24 (2001) 547-554.

A.K.Majumdar, H.Shah, P.Shukla and J.P.Barnwal. Effect of operating variables on shape of “Fish-hook” curves in cyclones.Minerals Engineering, Elsener, 2006(In press).

Sarkar J, Bhattacharyya S, Ramgopal M. Optimization of a transcritical CO2 heat pump cycle for simultaneous cooling and heating applications. Int J Refrigeration 2004; 27(8); 830-838.

Shukla S.K. and Gupta, S.K. Computer Modelling of Double Slope Solar Stills by Using Inner Glass Temperature, has been accepted for publication in international journal “Desalination”. (In press)

Tiwari, G.N., Shukla, S.K. and Singh I.P. Computer Modelling of Passive/Active Solar Still by Using Inner Glass Temperature, “Desalination”, (2003) Vol.154 (2), 171-185.

Shukla, S.K. and Sorayan, V.P.S., Thermal Modelling of Solar Stills: An Experimental validation, “Renewable Energy” (2005) Vol.30 (5), 683-699.

Shukla, S.K., Computer Modelling of Passive Solar Still by Evaluating Absorptivity of Basin Liner, “Ambient Energy” (2003) Vol.24 (3), 123-132.

Shukla S.K. Sorayan, V.P.S. and Gupta, S.K.,Parametric Studies of Passive/Active Solar Stills by using Modified Convective Mass transfer relations, “Ambient Energy”. Vol. (25) (4), 312-320.

Sarkar J, Bhattacharyya S, Ramgopal M. “Tran critical CO2 heat pump systems: Energy analysis including heat transfer and fluid flow effects”, Energy Conv Magmt, 2005; 46(13-14); 2053-2067.

Bhattacharyya S, Mukhopadyay S, Kumar A, Khurana, Sarkar J. “Optimization of a CO2-C3H8 cascade system for refrigeration and heating”, Int J Refrigeration, 2005; 28(8); 1284-1292.

Sarkar J, Bhattacharyya S, Ramgopal M. “Simulation of a Tran critical CO2 heat pump cycle for simultaneous cooling and heating applications”, Int J Refrigeration, 2006; 29(5); 735-743.

Sarkar J, S. Bhattacharyya, M. Ramgopal. “CO2 heat pump dryer: Part 1. Mathematical model and simulation”, Drying Technology 2006, 24; 1583-1591.

Sarkar J, S. Bhattacharyya, M. Ramgopal. “CO2 heat pump dryer: Part 2. Validation and simulation results”, Drying Technology 2006, 24; 1593-1600.

Sarkar J, Bhattacharyya S, Ramgopal M. “Natural refrigerant-based subcritical and transcritical cycles for high temperature heating”, Int J Refrigeration, 2007, 31(1); 3-10.

Agrawal N, Bhattacharyya S, Sarkar J. Optimization of two-stage transcritical carbon dioxide heat pump cycles, Int J Thermal Sc, 2007; 46(2); 180-187.

Khan, Debashis and Biswas, K.(2006) Circular Arc Crack Under Dynamic Load: A Generalized Approach for Energy Release Rate, International Journal of fracture, Vol. 141, pp.27-35

Khan, Debashis and Biswas, K.(2007) A New Conservation Integral for Circular Arc Crack under Multiple Loads, Engineering Fracture Mechanics, Vol. 74, pp. 2375-2394. (Accepted in 2006)